2097-V34PR3Allen-Bradley Kinetix 300 Servo Drive
Buying 2097-V34PR3 from Flexa Systems
Buy the Allen-Bradley 2097-V34PR3 Kinetix 300 servo drive, in stock brand new and refurbished, or send yours to Flexa Systems for repair. Rated at 480 VAC three-phase, 2.0 A and 1.0 kW, this drive belongs in control cabinets fed from a 480 V plant supply, powering a servo motor on packaging, conveying or positioning equipment. When replacing a failed unit, confirm the incoming supply is 480 VAC three-phase and that the connected motor sits within the 2.0 A and 1.0 kW ratings. Do not substitute a different Kinetix 300 size, because a mismatched rating will not suit the same motor. Each unit is tested before it ships and carries a 2-year warranty, and a refurbished drive typically saves 30-60% compared with brand new.
Repair option: send in your faulty unit for component-level repair — $2,430.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our Kinetix 300 repair and servo drive repair service.
2097-V34PR3 at a glance
| Part Number: | 2097-V34PR3 |
| Manufacturer: | ALLEN BRADLEY |
| Voltage: | 480 VAC Three-Phase |
| Current: | 2.0 A |
| Power: | 1.00 kW |
| Type: | KINETIX 300 |
| Control Modes: | Analog, PTO, or EtherNet/IP indexing |
| Motion Axes: | 1 (single-axis) |
| Communication: | EtherNet/IP |
| Feedback: | Absolute encoder |
| Safety: | Hardwired Safe Torque Off - ISO 13849-1 PL d, safety category 3 (SIL CL3) |
| Enclosure: | IP20 NEMA Open |
| Software: | Studio 5000 |
2097-V34PR3 FAQ
What should I match before installing a replacement 2097-V34PR3 Kinetix 300 drive?
Confirm that the servo motor and its feedback device are the same ones the original drive was configured for. The motor must also fall within the 480 VAC, 2.0 A, 1.0 kW ratings. If the old drive still communicates, back up its parameters, or keep the configuration file ready, so the new unit can be loaded and tuned to the same motor.
Is a refurbished or brand new 2097-V34PR3 the better buy?
Both conditions are in stock. Brand new suits new machine builds. Refurbished keeps an existing Kinetix 300 axis running at lower cost, and it has the same ratings and setup requirements.
Can I trade in a failed 2097-V34PR3?
Yes. Use the Trade-In button on this page to get a free evaluation of your Kinetix 300 drive, and the credit is applied toward the purchase.
Compatible alternatives
Equivalent units from other manufacturers — all in-stock at Flexa, covered by the same 2-year warranty.







