Allen-Bradley Repair
PowerFlex · ControlLogix · Kinetix
View repairs →Component-level repair of Lenze 8200 vector, 8400 StateLine / HighLine / TopLine, Lenze AC Tech SMVector, i510 / i550 and legacy 9300 vector drives. Free evaluation, written quote before any work, 2-year warranty. Ship it to us or drop it off in Lewisville, TX (Dallas–Fort Worth).
From a motor-mounted 8200 motec on a conveyor to a 9300 vector on a converting line — we repair the power section, control board and keypad interface, then load-test the drive before it ships.
The most common Lenze drive still running in US packaging and material-handling plants. Discontinued — repairing it avoids rewiring and re-parameterizing a new drive into the machine.
Current Lenze inverter platform on packaging machines, conveyors and process lines. We repair the power section and the control section, with the memory module kept so your parameters stay with the drive.
Compact SMV drives (ESV… part numbers), very common in US equipment — pumps, fans, mixers and OEM machines. Includes NEMA 1, NEMA 4X washdown and IP65 versions.
Lenze's newest slim-profile inverters. Long OEM lead times make repair the faster path when a line is down — we repair the power unit and the control unit separately.
High-performance frequency inverters on paper, printing, textile and converting machinery. No longer supported by the OEM — board-level repair is usually the only way to keep the machine as designed.
Motor-mounted and IP65 wall-mounted 8400 drives used on conveyors and intralogistics. Moisture, vibration and heat take their toll — we repair the electronics and reseal the unit.
A fault that comes back after a reset usually points to failed hardware. These are the ones we see most often on the bench.
Trips immediately on run, even with the motor disconnected? That points to a shorted IGBT or a failed gate driver. We replace the failed devices, not the whole power section.
Repeated DC-bus trips on a healthy supply usually mean aged DC-bus capacitors or a damaged pre-charge circuit — typical on 8200 and 9300 drives after years in service. Capacitor bank replacement and pre-charge repair.
Failed internal fan, clogged heat sink or a degraded thermal sensor. We replace the fan, re-apply thermal interface, verify the sensor and run the drive at load.
On SMVector, F.OF (output fault) that won't clear usually means a damaged output stage; F.HF (high DC bus) and F.AF (high temperature) that repeat on a normal load point to capacitors or cooling. All repairable at component level.
Lost communication with the keypad or fieldbus module, or a control board fault that returns after power cycling. Control board and interface repair, with parameters preserved where the drive allows it.
Dead keypad, no LEDs, or a drive that clicks and shuts off. Switch-mode power supply and input rectifier repair — one of the most common Lenze failures we see.
You know the price before we start. Nothing is repaired without your approval.
Ship the drive to us from anywhere in the US, or bring it to our shop in Lewisville, TX.
Bench diagnosis of the power section and control electronics, usually within 24–48 hours.
Fixed price and turnaround in writing. Approve it, or get the unit back.
Component-level repair, then a load test before return. 2-year warranty on the repair.
Our repair shop is in Lewisville, TX. If your plant is in the DFW area or North Texas, you can bring the failed drive in yourself — no packing, no freight, no waiting on a carrier.
Customers outside Texas ship to the same address; we repair Lenze drives for plants nationwide.
Typical ranges. Your exact price comes in a written quote after the free evaluation. Repair usually costs 40–70% of a new drive.
| Lenze drive | Typical repair cost |
|---|---|
| SMVector / AC Tech (compact) | $250 – $700 |
| 8200 vector / 8200 motec | $300 – $1,000 |
| 8400 StateLine / HighLine / TopLine | $400 – $1,500 |
| i510 / i550 | $350 – $1,200 |
| 9300 vector | $600 – $2,000 |
Rush 24–72h service is available for line-down situations. See rush service.
Tested, refurbished Lenze units available for immediate purchase or exchange. All units carry our 2-year warranty.








Lenze servo drives and other VFD brands we repair.
Send it in or drop it off in Lewisville, TX. Free evaluation, written quote, 2-year warranty. Standard turnaround 5–30 business days, rush available.
Answers to the questions we get most about Lenze drive repair.
Lenze 8200 vector and 8200 motec; 8400 StateLine, HighLine, TopLine, motec and protec; Lenze AC Tech SMVector and the older AC Tech MC Series; i510 and i550; and the legacy 9300 vector frequency inverters. For Lenze 9400 and ECS servo drives, see our Lenze drive and servo repair page.
Typical ranges: SMVector $250–$700, 8200 vector $300–$1,000, 8400 $400–$1,500, i510 / i550 $350–$1,200, 9300 vector $600–$2,000. Evaluation is free and you get a written quote before any work. Repair typically saves 30–60% compared to a new drive.
Yes. Our shop is at 860 Hembry St, Suite 401, Lewisville, TX 75057, in the Dallas–Fort Worth area. Call (254) 254-0005 or request a quote first so we expect your unit.
Yes. The 8200 vector is discontinued, and replacing it with an 8400 or i550 usually means new wiring, new parameters and sometimes a new fieldbus module. Repairing the 8200 keeps the machine as it is. Common repairs are the output IGBTs (OC1 / OC2), DC-bus capacitors (OU / LU) and the internal power supply.
On the 8400 the parameters live on the removable memory module, so leave it in the drive or send it with the unit. On the 8200 and SMVector we preserve the parameter set wherever the control board allows it; we also recommend keeping your own backup before shipping.
Standard turnaround is 5–30 business days; rush 24–72h service is available for line-down situations. Every repair carries a 2-year parts and labor warranty and is load-tested before it leaves the shop.
No. Flexa Systems is an independent repair company, not affiliated with Lenze. We repair Lenze drives at component level and back the work with our own 2-year warranty.
Lenze, SMVector and AC Tech are trademarks of Lenze SE and its affiliates. Flexa Systems LLC is an independent repair company and is not affiliated with, endorsed by, or authorized by Lenze.
Component-level repair for every major industrial automation brand — including discontinued and obsolete systems.
PowerFlex · ControlLogix · Kinetix
View repairs →SINAMICS · S7 · SIMATIC
View repairs →Drives · Servos · Motion
View repairs →ACS · ACH Series
View repairs →CNC · Servo · Spindle
View repairs →RX3i · RX7i · 90-30 · VersaMax
View repairs →MELSEC · FR Series
View repairs →590 DC · 690 AC · 890 Vector
View repairs →VLT · FC Series
View repairs →FRENIC · MONITOUCH · FALDIC
View repairs →Sysmac · NJ · NX · CS1
View repairs →