Can I buy a ESV113N02TXB from Flexa Systems?

Yes. Flexa Systems sells the ESV113N02TXB outright — refurbished units reconditioned to OEM specifications and, where available, brand new stock. Units ship from our Lewisville, Texas facility to anywhere in the United States, and every unit we sell carries a 2-year warranty covering parts and labor. Current availability and pricing are shown on this page.

Does a ESV113N02TXB purchased from Flexa Systems come with a warranty?

Yes. Every ESV113N02TXB that Flexa Systems sells — refurbished or brand new — includes a 2-year (24-month) warranty covering parts and labor, starting on the date the unit ships from our facility. The same 2-year warranty applies to units we repair. Each unit is fully tested under load before it leaves our Lewisville, Texas facility.

How long does ESV113N02TXB repair take?

Standard turnaround for ESV113N02TXB repair is 5–30 business days from the day we receive the unit. Rush service (24–72 hours) is available — contact us before shipping.

Does the ESV113N02TXB repair come with a warranty?

Yes. All ESV113N02TXB repair, refurbished, and brand new units sold by Flexa Systems include a 2-year warranty covering parts and labor. Units are fully tested before shipping.

Can I get a quote before sending my ESV113N02TXB?

Yes. Use the Get Quote for Repair button on this page or contact us directly. We provide a free diagnostic estimate once we receive the unit. No repair charges if you decide not to proceed.

Lenze

ESV113N02TXB

SKU: 2100000024520

$942.00

2-Year Warranty

Free Diagnostics

Ships in 1–2 Business Days

Nationwide Service

ESV113N02TXB repair service is the primary solution when this Lenze 11.0 kW variable frequency drive goes down and halts production — Lenze ESV113N02TXB repair is critical to address quickly given how central this drive is to motor control operations, and many facilities also keep an ESV113N02TXB refurbished unit on the shelf as a hot spare to minimize unplanned downtime. Rated for 200–240 VAC single or three-phase input with a 42.0 A output current capacity, this drive delivers precise speed and torque control for AC induction motors in the 11 kW power class. If you've searched for ESV113N02TXB repair near me, Flexa Systems provides depot and field support from our Lewisville TX facility, shipping nationwide with fast turnaround. The ESV113N02TXB is a member of Lenze's SMVector series, a compact, DIN-rail or panel-mount drive platform commonly deployed in conveyor systems, pump stations, packaging lines, and material handling equipment. ESV113N02TXB troubleshooting often involves interpreting the drive's onboard fault history, checking DC bus voltage levels, and inspecting the IGBT power module for thermal damage after overcurrent events. For facilities evaluating industrial VFD repair versus full replacement, this unit's modular construction makes it highly serviceable — capacitors, gate driver boards, and power stacks are all discrete, replaceable components. All ESV113N02TXB repair service work completed by Flexa Systems includes free diagnostics and a 2-year warranty on parts and labor.

Technical Specifications

Part Number	ESV113N02TXB
Manufacturer	Lenze
Voltage	200–240 VAC
Current Rating	42.0 A
Power Rating	11.0 kW
Package / Type	SMVector Series Variable Frequency Drive (VFD)

Compatibility

The ESV113N02TXB is compatible with standard three-phase AC induction motors using NEMA frame sizes 143T through 256T and accepts analog speed reference signals (0–10 VDC, 4–20 mA) as well as digital inputs configurable for PLC interfacing with Allen-Bradley ControlLogix and CompactLogix families or Siemens S7-300/S7-1200 controllers via hardwired I/O. Lenze ESV113N02TXB integration with fieldbus networks is supported through optional communication modules including the EMF2133IB (DeviceNet), EMF2178IB (Profibus DP), and EMF2132IB (CANopen) plug-in cards that mount directly to the drive's keypad port. The ESV113N02TXB serves as a direct ESV113N02TXB replacement for earlier SMVector models including the ESV112N02TXB and ESV751N02TXB where power class overlap exists, sharing the same mounting footprint, terminal layout, and parameter structure. Input line reactors such as the Lenze EZAELN3X016H and external EMC filters rated for the 240 V class are fully compatible and recommended for installations where line impedance is below 1% or supply-side harmonic distortion is a concern.

Service Options

Repair Service

Ship your faulty ESV113N02TXB to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.

Refurbished

In-stock Lenze ESV113N02TXB variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.

Brand New

New ESV113N02TXB in original Lenze packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.

Common Failure Modes

DC bus overvoltage fault (F-OV) triggered during deceleration ramps on ESV113N02TXB units where braking resistor circuits are absent — particularly common in high-inertia load applications like large centrifugal fans where regenerative energy spikes exceed the 400 VDC bus threshold.
IGBT desaturation fault (F-OC) occurring within the first 2 seconds of motor start, often traced to a shorted output power transistor in phase U or W — ESV113N02TXB troubleshooting should include static IGBT diode-mode testing at the output terminals before applying power.
Ground fault trip (F-GF) on ESV113N02TXB fault logs associated with insulation breakdown in motor windings after years of operation with long cable runs exceeding 75 feet without an output reactor, causing capacitive leakage current to exceed the drive's ground fault detection threshold.
Control board communication loss presenting as a blank keypad display with the drive unresponsive to serial commands — typically caused by corrosion or cracked solder joints on the RJ45 keypad connector header, a known ESV113N02TXB fault pattern in high-humidity or wash-down environments.

Frequently Asked Questions

Is the ESV113N02TXB compatible with other Lenze drives as a drop-in replacement, or can it replace drives from other manufacturers?

The ESV113N02TXB is directly interchangeable with the Lenze ESV112N02TXB and shares the same DIN-rail mounting pattern, terminal block positions, and parameter set, making it a straightforward ESV113N02TXB replacement in most panel configurations without rewiring. Within the broader SMVector series, the ESV113N02TXB compatible with adjacent power-class models like the ESV152N02TXB is limited to software compatibility — mechanical fitment may differ. For cross-brand replacement scenarios, facilities have successfully used the ESV113N02TXB as a substitute for the ABB ACS355-03U-23A1-4 and the Yaskawa V1000 CIMR-VU2A0033FAA in the same 11 kW, 240 V class, though parameter remapping and I/O rewiring are required. Always verify motor FLA, carrier frequency settings, and fieldbus module compatibility before commissioning any cross-brand swap.

How do I know if my ESV113N02TXB is repairable or if I need to buy a new unit?

Most ESV113N02TXB repair cases are viable when the damage is limited to the DC bus capacitor bank, gate driver board, inrush relay, or a single IGBT module — these are discrete components that Flexa Systems stocks and replaces routinely. Units that have sustained burn damage to the control PCB from a sustained overcurrent event, or where the chassis has suffered physical deformation from a surge event, are evaluated case-by-case, but even then Lenze ESV113N02TXB control boards can sometimes be sourced and swapped. If the drive powers up but throws persistent F-OC or F-OV faults that don't clear after parameter reset, that typically points to a repairable power stage fault rather than a total loss. Send the unit in for free diagnostics — our technicians will provide a repair vs. replace recommendation before any work begins.

Where can I get ESV113N02TXB repair service with a warranty?

Flexa Systems, based in Lewisville TX, specializes in ESV113N02TXB repair service and ships repaired and tested units nationwide with a 2-year warranty covering all replaced components and labor. Standard turnaround is 5–7 business days from receipt of the unit, with expedited 2–3 day options available for critical production situations. If you need to buy ESV113N02TXB USA stock immediately while your original unit is being repaired, Flexa also maintains an inventory of tested ESV113N02TXB refurbished units available for sale or exchange. Contact Flexa Systems directly to arrange a prepaid shipping label, free incoming diagnostics, and a written repair quote before any charges are applied.

Where can I get ESV113N02TXB repair service with a warranty?

Flexa Systems provides professional ESV113N02TXB repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.

Flexa Systems specializes in Lenze ESV113N02TXB variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.

Repair option: component-level repair is available for this model — free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Request a repair quote. Learn more about our VFD repair service.

Technical Specifications

Part Number:	ESV113N02TXB
Manufacturer:	Lenze
Voltage:	200–240 VAC
Current:	42.0 A
Power:	11.0 kW
Type:	SMVector Series Variable Frequency Drive (VFD)

ESV113N02TXB

Technical Specifications

Ask for Price

Trade-In Program

You May Also Need