Siemens Repair
SINAMICS · S7 · SIMATIC
View repairs →Component-level repair of Allen-Bradley Kinetix servo drives: Kinetix 300, 350, 2000, 5500, 5700, 6000 / 6500 and legacy Ultra3000. Power stage, feedback, safe-torque-off and communication faults. Free evaluation, written quote before any work, 2-year warranty. Ship it to us or drop it off in Lewisville, TX (Dallas–Fort Worth).
From a single-axis Kinetix 300 on a packaging machine to a multi-axis Kinetix 6500 system — we repair the power stage, control and feedback boards, then run the drive with a motor before it ships.
Indexing servo drives on EtherNet/IP, very common on packaging and assembly machines.
Integrated-motion single-axis drives on CompactLogix machines.
Compact multi-axis SERCOS system — integrated axis and axis modules.
Integrated axis modules and axis modules on power rails, SERCOS (6000) or EtherNet/IP (6500).
Compact EtherNet/IP servo drives with single-cable motor connection.
High-power multi-axis drives with shared DC bus on large machines.
A fault that comes back after a reset with the motor and cable checked usually points to drive hardware. These are the ones we see most often.
The drive trips as soon as it enables, even with a good motor. Usually a shorted IGBT or a failed gate driver — we replace the failed devices, not the whole power board.
Bus faults on a healthy supply point to aged DC-bus capacitors, a damaged pre-charge circuit or a shunt problem. Capacitor and pre-charge repair.
Feedback faults that stay after swapping the motor cable usually mean a damaged feedback input on the drive. We repair the feedback circuitry and test with a motor.
STO faults with correct safety wiring point to the drive's safety circuit. We repair it and verify STO operation.
No status LEDs or display. Internal power supply and control-power repair.
Lost EtherNet/IP or SERCOS connection while the network checks out. Port and communication circuitry repair.
You know the price before we start. Nothing is repaired without your approval.
Ship the drive to us from anywhere in the US, or bring it to our shop in Lewisville, TX.
Bench diagnosis, usually within 24–48 hours.
Fixed price and turnaround in writing. Approve it, or get the unit back.
Component-level repair, then a motor test before return. 2-year warranty on the repair.
Our repair shop is in Lewisville, TX. If your plant is in the DFW area or North Texas, you can bring the failed unit in yourself — no packing, no freight, no waiting on a carrier.
Customers outside Texas ship to the same address; we repair Allen-Bradley servo drives for plants nationwide.
Typical ranges. Your exact price comes in a written quote after the free evaluation. Repair usually costs 40–70% of a new unit.
| Allen-Bradley servo drive | Typical repair cost |
|---|---|
| Kinetix 350 | $450 – $1,200 |
| Kinetix 5500 | $650 – $1,800 |
| Kinetix 2000 | $700 – $2,200 |
| Kinetix 6000 / 6500 | $800 – $2,500 |
| Kinetix 5700 | $900 – $2,800 |
| Kinetix 300, Ultra3000 & others | Quote after free evaluation |
Rush 24–72h service is available for line-down situations. See rush service.
Tested, refurbished Allen-Bradley Servo units available for immediate purchase or exchange. All units carry our 2-year warranty.








Model pages and other Allen-Bradley equipment we repair.
Send it in or drop it off in Lewisville, TX. Free evaluation, written quote, 2-year warranty. Standard turnaround 5–30 business days, rush available.
Answers to the questions we get most about Kinetix repair.
The Kinetix family: Kinetix 300 and 350 (2097), Kinetix 2000 (2093), Kinetix 6000 and 6500 (2094), Kinetix 5500 and 5700 (2198), plus legacy Ultra3000 and Ultra5000 (2098) drives.
Typical ranges: Kinetix 350 $450–$1,200, Kinetix 5500 $650–$1,800, Kinetix 2000 $700–$2,200, Kinetix 6000/6500 $800–$2,500 and Kinetix 5700 $900–$2,800. Evaluation is free and you get a written quote before any work. Repair typically saves 30–60% compared to a new drive.
Yes. Our shop is at 860 Hembry St, Suite 401, Lewisville, TX 75057, in the Dallas–Fort Worth area. Call (254) 254-0005 or request a quote first so we expect your unit.
Yes. After repair the drive is powered up and run with a servo motor, including feedback and enable checks, before it ships.
On integrated-motion drives (Kinetix 350, 5500, 5700, 6500) the configuration comes from the controller project, so the drive normally goes back in without changes. On the Kinetix 300 we keep the stored configuration wherever the drive allows it; keep your own backup too.
Standard turnaround is 5–30 business days; rush 24–72h service is available for line-down situations. Every repair carries a 2-year parts and labor warranty.
No. Flexa Systems is an independent repair company, not affiliated with Rockwell Automation or Allen-Bradley. We repair Kinetix drives at component level and back the work with our own 2-year warranty.
Allen-Bradley, Kinetix and Rockwell Automation are trademarks of Rockwell Automation, Inc. Flexa Systems LLC is an independent repair company and is not affiliated with, endorsed by, or authorized by Rockwell Automation.
Component-level repair for every major industrial automation brand — including discontinued and obsolete systems.
SINAMICS · S7 · SIMATIC
View repairs →Drives · Servos · Motion
View repairs →ACS · ACH Series
View repairs →CNC · Servo · Spindle
View repairs →RX3i · RX7i · 90-30 · VersaMax
View repairs →MELSEC · FR Series
View repairs →590 DC · 690 AC · 890 Vector
View repairs →Drives · I/O Systems
View repairs →VLT · FC Series
View repairs →FRENIC · MONITOUCH · FALDIC
View repairs →Sysmac · NJ · NX · CS1
View repairs →