Can I buy a 890CD/5/0010B/N/00/A/US from Flexa Systems?

Yes. Flexa Systems sells the 890CD/5/0010B/N/00/A/US outright — refurbished units reconditioned to OEM specifications and, where available, brand new stock. Units ship from our Lewisville, Texas facility to anywhere in the United States, and every unit we sell carries a 2-year warranty covering parts and labor. Current availability and pricing are shown on this page.

Does a 890CD/5/0010B/N/00/A/US purchased from Flexa Systems come with a warranty?

Yes. Every 890CD/5/0010B/N/00/A/US that Flexa Systems sells — refurbished or brand new — includes a 2-year (24-month) warranty covering parts and labor, starting on the date the unit ships from our facility. The same 2-year warranty applies to units we repair. Each unit is fully tested under load before it leaves our Lewisville, Texas facility.

How long does 890CD/5/0010B/N/00/A/US repair take?

Standard turnaround for 890CD/5/0010B/N/00/A/US repair is 5–30 business days from the day we receive the unit. Rush service (24–72 hours) is available — contact us before shipping.

Does the 890CD/5/0010B/N/00/A/US repair come with a warranty?

Yes. All 890CD/5/0010B/N/00/A/US repair, refurbished, and brand new units sold by Flexa Systems include a 2-year warranty covering parts and labor. Units are fully tested before shipping.

Can I get a quote before sending my 890CD/5/0010B/N/00/A/US?

Yes. Use the Get Quote for Repair button on this page or contact us directly. We provide a free diagnostic estimate once we receive the unit. No repair charges if you decide not to proceed.

Parker

890CD/5/0010B/N/00/A/US

SKU: 2100000023363

$2,800.00

2-Year Warranty

Free Diagnostics

Ships in 1–2 Business Days

Nationwide Service

890CD/5/0010B/N/00/A/US repair service is available at Flexa Systems for facilities running Parker's AC890 series variable frequency drives in demanding production environments. Our technicians specialize in Parker 890CD/5/0010B/N/00/A/US repair, and we maintain an inventory of 890CD/5/0010B/N/00/A/US refurbished units ready for same-week deployment when downtime cannot wait for bench repair. This unit operates on a 680VDC bus, delivering up to 8A output current and 5 HP (4 kW) of motor control capability — specifications that place it squarely in packaging, textile, conveyor, and light pump applications where precise speed regulation is critical. Engineers searching for 890CD/5/0010B/N/00/A/US troubleshooting support will find that this drive's distributed control architecture and onboard DSP make field diagnosis more involved than with simpler drives, requiring oscilloscope-level inspection and firmware interrogation. For operations that cannot afford extended lead times, 890CD/5/0010B/N/00/A/US fault codes can often be interpreted remotely before the unit even ships to our facility, accelerating turnaround. Industrial VFD repair at this power class demands attention to IGBT gate driver integrity, DC bus capacitor ESR, and control board trace corrosion — all areas our team evaluates during every inspection. If you're sourcing a 890CD/5/0010B/N/00/A/US for sale to cover a production gap, our Texas facility stocks tested units ready for immediate shipment. Flexa Systems serves customers from Lewisville TX and ships repaired and replacement drives nationwide with documented test data included.

Technical Specifications

Part Number	890CD/5/0010B/N/00/A/US
Manufacturer	Parker
Voltage	680VDC
Current Rating	8A
Power Rating	5 HP / 4 kW
Package / Type	AC890 (890CD Common DC Bus Inverter/Drive)

Compatibility

The 890CD/5/0010B/N/00/A/US compatible with Parker's broader AC890 platform ecosystem, including the 890CS regenerative front-end modules and the 890SD standalone drives, allowing it to share firmware tools, parameter sets, and DSP Mint programming environments across a coordinated multi-drive line. Parker 890CD/5/0010B/N/00/A/US integration extends to fieldbus option cards including Profibus-DP (890PO-BP), EtherNet/IP (890PO-ENIP), and CANopen communication modules, making it addressable from Siemens TIA Portal, Rockwell ControlLogix/CompactLogix platforms, and Beckhoff TwinCAT systems. The 890CD/5/0010B/N/00/A/US replacement for legacy Parker SSD 690+ series drives in the 4 kW class is a direct engineering path, with parameter migration tools available through DSE Lite software to reduce recommissioning time. Compatible encoder feedback types include TTL incremental (5V differential) and sinusoidal encoders via the optional 890PO-EN encoder interface card, supporting closed-loop vector control on NEMA 56 through 145T frame motors commonly used in this horsepower range.

Service Options

Repair Service

Ship your faulty 890CD/5/0010B/N/00/A/US to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.

Refurbished

In-stock Parker 890CD/5/0010B/N/00/A/US variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.

Brand New

New 890CD/5/0010B/N/00/A/US in original Parker packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.

Common Failure Modes

IGBT desaturation fault (Trip 6) on the 890CD/5/0010B/N/00/A/US triggered by failed low-side gate driver resistor on phase U, typically presenting as an immediate trip within 200ms of enable with no motor current flowing.
DC bus overvoltage trip (Trip 3) during deceleration in 890CD/5/0010B/N/00/A/US units lacking a braking resistor on high-inertia loads, where the 680VDC bus exceeds the overvoltage threshold due to regenerative energy with no dissipation path.
Control board EEPROM corruption causing 890CD/5/0010B/N/00/A/US troubleshooting difficulty — the drive powers up but reports parameter checksum faults and fails to retain setpoints after power cycle, a condition linked to brown-out events during parameter writes.
Electrolytic DC bus capacitor failure presenting as low bus voltage fault (Trip 2) on the 890CD/5/0010B/N/00/A/US during full-load acceleration, caused by elevated ESR in aged capacitors reducing effective stored energy and collapsing bus voltage under peak demand current.

Frequently Asked Questions

Is the 890CD/5/0010B/N/00/A/US compatible with or interchangeable with other Parker or third-party drives in the same power class?

The 890CD/5/0010B/N/00/A/US replacement for same-frame Parker SSD 690+ drives (specifically the 690PB/4/0010/3/F/0/0/00 in the 4 kW class) is supported at the mechanical and power wiring level, though control terminal assignments and fieldbus configuration require remapping. If you need to replace 890CD/5/0010B/N/00/A/US with a third-party alternative, the Emerson Control Techniques Unidrive M200 at 4 kW and the ABB ACS550-01-08A8-4 share similar I/O footprints and can be adapted with modified terminal wiring, though application programming must be rebuilt from scratch. Parker's DSE Lite software is specific to the 890 and 690 series and does not transfer to competitor platforms, so substitution carries a recommissioning burden. For drop-in continuity with minimal engineering effort, staying within the Parker AC890 family is strongly advisable.

How do I know whether my 890CD/5/0010B/N/00/A/US is worth repairing or should be replaced outright?

890CD/5/0010B/N/00/A/US repair is cost-effective in the majority of cases where failure is isolated to a single subsystem — blown IGBTs, failed gate drivers, degraded bus capacitors, or corrupted firmware are all component-level faults that a qualified shop can resolve for substantially less than a new unit. However, a Parker 890CD/5/0010B/N/00/A/US that has sustained primary PCB damage from a sustained three-phase short, severe overtemperature carbonization across multiple board layers, or physical chassis deformation from a fault event may present repair costs that approach or exceed replacement value. Our free diagnostics evaluation identifies which category your unit falls into before any repair commitment is made. Units showing only trip history and no physical damage are strong repair candidates, while those with burned power traces or cracked IGBT mounting substrate are assessed case-by-case.

Where can I get 890CD/5/0010B/N/00/A/US repair service with a warranty?

Flexa Systems, based in Lewisville TX, provides full-service 890CD/5/0010B/N/00/A/US repair service with a 2-year warranty on all completed repairs, covering both parts and labor on the repaired fault condition. We offer free diagnostics on every unit received, and most repairs are completed within 5–7 business days with load-bank tested results documentation shipped alongside the drive. Customers across the country use our nationwide shipping program to send in failed units and receive tested, warranted drives without needing a local service center. If you need to buy 890CD/5/0010B/N/00/A/US USA from a stocking source rather than wait for repair, we also maintain refurbished exchange units that ship immediately under the same 2-year warranty terms.

Where can I get 890CD/5/0010B/N/00/A/US repair service with a warranty?

Flexa Systems provides professional 890CD/5/0010B/N/00/A/US repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.

Flexa Systems specializes in Parker 890CD/5/0010B/N/00/A/US variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.

Repair option: send in your faulty unit for component-level repair — $1,400.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our VFD repair service.

Technical Specifications

Part Number:	890CD/5/0010B/N/00/A/US
Manufacturer:	Parker
Voltage:	680VDC
Current:	8A
Power:	5 HP / 4 kW
Type:	AC890 (890CD Common DC Bus Inverter/Drive)

890CD/5/0010B/N/00/A/US

Technical Specifications

Ask for Price

Trade-In Program

You May Also Need