Esc close · ↑↓ navigate · ↵ open · ⌘K / Ctrl+K reopen
Allen-Bradley
2097-V32PR4-LM
No reviews
SKU: 2100000022069
$1,104.00
Contact us for pricing
2-Year Warranty
Free Diagnostics
5–30 Day Turnaround
Nationwide Service
2097-V32PR4-LM repair service is available at Flexa Systems for this Allen-Bradley Kinetix 350 single-axis EtherNet/IP servo drive, and facilities requiring ALLEN BRADLEY 2097-V32PR4-LM repair or a 2097-V32PR4-LM refurbished unit will find both options supported under one roof. The Kinetix 350 platform delivers closed-loop servo control over a standard EtherNet/IP network, eliminating the need for dedicated motion networks while maintaining deterministic axis control in coordinated multi-axis systems. Engineers searching for 2097-V32PR4-LM troubleshooting guidance should note that this drive accepts single-phase or three-phase input and is rated for continuous output currents appropriate for smaller servo axes commonly found in packaging, assembly, and material handling lines. The 2097-V32PR4-LM supports absolute and incremental encoder feedback directly through its integrated feedback port, making it a frequent choice for precision pick-and-place and conveyor indexing applications where position repeatability is critical. When 2097-V32PR4-LM fault codes appear on the drive or HIM display, the root cause often traces back to DC bus anomalies, feedback signal loss, or thermal derating events triggered by inadequate panel ventilation. Facilities evaluating industrial VFD repair versus outright replacement will benefit from a professional diagnostic assessment before committing to procurement lead times that can stretch weeks on new units. Flexa Systems provides free diagnostics on every unit received, so customers researching 2097-V32PR4-LM repair near me can ship their drive to our Lewisville TX facility and receive a no-obligation evaluation before any repair work begins.
Technical Specifications
Part Number
2097-V32PR4-LM
Manufacturer
ALLEN BRADLEY
Package / Type
Servo Drive / Motion Control Drive
Compatibility
The 2097-V32PR4-LM is compatible with Allen-Bradley ControlLogix and CompactLogix controllers running Studio 5000 Logix Designer, communicating over EtherNet/IP using the Integrated Motion on EtherNet/IP (IME) protocol for fully coordinated axis control. ALLEN BRADLEY 2097-V32PR4-LM integration is supported alongside other Kinetix 350 axes such as the 2097-V31PR0 and 2097-V32PR3 within the same motion group, allowing mixed-axis configurations managed from a single Logix controller. The 2097-V32PR4-LM replacement for legacy Kinetix 3 drives (catalog prefix 2097-Vxxxx older series) is achievable with wiring and parameter reconfiguration, and the drive accepts feedback from Allen-Bradley compatible servo motors including the MPL, MPM, and VPL motor families using the standard feedback connector pinout. Compatible accessories include the 2090-XXLF-Sxxx series motor power cables, 2097-Rx shunt resistor modules, and standard 24V DC logic power supplies rated at minimum 1.5A for the control circuit.
Service Options
Repair Service
Ship your faulty 2097-V32PR4-LM to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.
Refurbished
In-stock ALLEN BRADLEY 2097-V32PR4-LM variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.
Brand New
New 2097-V32PR4-LM in original ALLEN BRADLEY packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.
Common Failure Modes
DC bus overvoltage fault (E-code E28) triggered during deceleration on 2097-V32PR4-LM units without an external shunt resistor, particularly on vertical load axes where regenerative energy cannot be absorbed by the internal shunt alone.
Feedback loss fault causing immediate axis inhibit on 2097-V32PR4-LM troubleshooting scenarios where the 2090-series feedback cable shield is improperly terminated, resulting in intermittent encoder signal dropout at high motor speeds above 3000 RPM.
Drive output IGBT failure presenting as an overcurrent trip (E-code E13) on startup, typically caused by motor winding insulation breakdown or a sustained phase-to-phase short in the motor cable — a recurring failure mode in 2097-V32PR4-LM units operating in high-humidity or washdown-adjacent environments.
Control board power supply degradation causing the 2097-V32PR4-LM fault state where the drive fails to establish EtherNet/IP communication with the Logix controller at powerup, often misdiagnosed as a network configuration issue before the internal 5V rail voltage is measured and found out of tolerance.
Frequently Asked Questions
Is the 2097-V32PR4-LM compatible with or interchangeable with other Kinetix or PowerFlex drives?
The 2097-V32PR4-LM compatible with other Kinetix 350 catalog numbers shares the same EtherNet/IP motion protocol, making axis-for-axis substitution within the Kinetix 350 family straightforward provided the continuous and peak current ratings match the motor requirements. However, using the 2097-V32PR4-LM as a replacement for a Kinetix 5500 (2198-Hxxx series) or a PowerFlex 527 requires significant reconfiguration because those drives use different Studio 5000 Add-On Profiles and have different physical wiring layouts. The 2097-V32PR4-LM replacement for an older Kinetix 3 (2097-V33PR6) is mechanically and electrically feasible with motor cable adaptation, but engineers should verify the bus voltage class and continuous output current rating before finalizing the swap. Competitive drives such as Siemens S120 or Kollmorgen AKD are not drop-in interchangeable due to protocol and feedback interface differences.
How do I know whether my 2097-V32PR4-LM is worth repairing or should be replaced outright?
A 2097-V32PR4-LM repair is cost-justified in most cases where the fault condition involves power board component failures, blown gate drive circuits, or degraded capacitors, since these are board-level repairs that restore full OEM-equivalent functionality at a fraction of new-unit cost. The ALLEN BRADLEY 2097-V32PR4-LM becomes a candidate for replacement rather than repair when the drive chassis has sustained physical damage such as a cracked backplane connector, corroded bus bar contacts from liquid ingress, or a burned output stage with collateral damage to the feedback interface circuitry. Fault codes E13 (overcurrent), E28 (overvoltage), and E10 (undervoltage) are generally recoverable through component-level repair, while drives showing no response to 24V control power with visible burn marks on the control board present a higher repair risk that a diagnostic evaluation will clarify. Sending the unit to a qualified industrial VFD repair facility for free diagnostics before ordering a new drive is the recommended first step.
Where can I get 2097-V32PR4-LM repair service with a warranty?
Flexa Systems, based in Lewisville TX, provides ALLEN BRADY 2097-V32PR4-LM repair service with a 2-year warranty on all completed repairs, covering both parts and labor for the repaired fault conditions. Customers across the country can ship their units directly to our facility, and our nationwide service model means turnaround typically runs 5 to 7 business days from receipt of the drive, with expedited options available for critical production downtime situations. For plants that need to buy 2097-V32PR4-LM USA stock immediately while their failed unit is in repair, Flexa Systems also maintains 2097-V32PR4-LM for sale inventory of refurbished exchange units that ship same-day or next-day. Contact our technical team directly to initiate a free diagnostic evaluation or to confirm exchange unit availability before shipping.
Where can I get 2097-V32PR4-LM repair service with a warranty?
Flexa Systems provides professional 2097-V32PR4-LM repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.
Flexa Systems specializes in ALLEN BRADLEY 2097-V32PR4-LM variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.
Repair option: send in your faulty unit for component-level repair — $1,104.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our servo drive repair service.
Technical Specifications
Part Number:
2097-V32PR4-LM
Manufacturer:
ALLEN BRADLEY
Type:
Servo Drive / Motion Control Drive
Ask for Price
Allen-Bradley - 2097-V32PR4-LM
Trade-In Program
Allen-Bradley — 2097-V32PR4-LM
✓Thank you — your request has been sent. We'll get back to you shortly.
