Siemens Repair
SINAMICS · S7 · SIMATIC
View repairs →Component-level repair of Allen-Bradley PanelView operator terminals: PanelView Plus 7 and Plus 6, PanelView Plus, PanelView 800, Component and legacy PanelView Standard. Touchscreens, displays, power supplies and communication ports. Free evaluation, written quote before any work, 2-year warranty. Ship it to us or drop it off in Lewisville, TX (Dallas–Fort Worth).
From a PanelView Plus 7 on a new packaging line to a 20-year-old PanelView 1000 on a press — we repair the touch, display, power and logic boards, then test the terminal before it ships.
Standard and Performance terminals on CompactLogix and ControlLogix machines. Long lead times on new units make repair the faster way back to production.
Still running on thousands of US lines. Replacing it means a migration to PanelView Plus 7 and a converted application — repair keeps the machine as it is.
The original PanelView Plus 400–1500 and Plus Compact terminals with the separate logic module and display module. We repair both halves.
Small-machine terminals paired with Micro800 and CompactLogix controllers. Touchscreen, display and power supply repair.
The original PanelView 300–1400 keypad and touch terminals, discontinued for years. Repair is usually the only way to keep these machines running without rewriting the HMI.
Low-cost PanelView Component terminals on small machines and skids. Display, touch and power supply repair.
These are the failures we see most often on Allen-Bradley HMIs on our bench.
Touches register in the wrong place, part of the screen is dead, or the glass is cracked. We replace the touch digitizer and calibrate it — the most common PanelView repair we do.
The terminal runs but the screen is dark or fading. Usually a failed CCFL backlight or inverter board on PanelView Plus 6 and older units, or an LED driver fault on newer ones.
The terminal hangs on the splash screen or keeps restarting. Typical causes are a failing internal power rail, corrupted storage or a logic board fault — we repair the hardware and keep your application.
No LEDs and no display on a good 24 VDC (or AC) supply. Internal power supply repair — capacitors, regulators and input protection.
Lost connection to the controller over EtherNet/IP, DH+, DH-485 or RIO while the cabling and PLC check out. We repair the communication port and interface circuitry.
Dead or stuck keys on keypad PanelView terminals (K-models). Membrane keypad replacement and key-circuit repair.
You know the price before we start. Nothing is repaired without your approval.
Ship the terminal to us from anywhere in the US, or bring it to our shop in Lewisville, TX.
Bench diagnosis of the touch, display, power and logic electronics, usually within 24–48 hours.
Fixed price and turnaround in writing. Approve it, or get the unit back.
Component-level repair, then a full function test before return. 2-year warranty on the repair.
Our repair shop is in Lewisville, TX. If your plant is in the DFW area or North Texas, you can bring the failed HMI in yourself — no packing, no freight, no waiting on a carrier.
Customers outside Texas ship to the same address; we repair Allen-Bradley HMIs for plants nationwide.
Typical ranges. Your exact price comes in a written quote after the free evaluation. Repair usually costs 40–70% of a new terminal.
| Allen-Bradley HMI | Typical repair cost |
|---|---|
| PanelView Plus 6 | $400 – $1,000 |
| PanelView Plus 7 (Standard & Performance) | $450 – $1,200 |
| PanelView Plus, Plus Compact, 800, Component & Standard | Quote after free evaluation |
Rush 24–72h service is available for line-down situations. See rush service.
Tested, refurbished Allen-Bradley HMI units available for immediate purchase or exchange. All units carry our 2-year warranty.






Model pages and other Allen-Bradley equipment we repair.
Send it in or drop it off in Lewisville, TX. Free evaluation, written quote, 2-year warranty. Standard turnaround 5–30 business days, rush available.
Answers to the questions we get most about PanelView repair.
The whole PanelView family: PanelView Plus 7 Standard and Performance, PanelView Plus 6, the original PanelView Plus and Plus Compact, PanelView 800, PanelView Component and the legacy PanelView Standard (550, 600, 900, 1000, 1400) keypad and touch terminals.
Typical ranges: PanelView Plus 6 $400–$1,000 and PanelView Plus 7 $450–$1,200, depending on the failure. Other PanelView models are quoted after a free evaluation. You get a written quote before any work, and repair usually costs 40–70% of a new terminal.
Yes. Our shop is at 860 Hembry St, Suite 401, Lewisville, TX 75057, in the Dallas–Fort Worth area. Call (254) 254-0005 or request a quote first so we expect your unit.
In most repairs the application stays on the terminal and comes back exactly as it left. We still recommend keeping your own backup of the runtime file (.mer) before you ship or drop off the unit.
If the machine works and only the terminal failed, repair is usually faster and cheaper: an upgrade to PanelView Plus 7 means converting the application, new firmware and sometimes a different cutout. Repair keeps the machine as it is.
Standard turnaround is 5–30 business days; rush 24–72h service is available for line-down situations. Every repair carries a 2-year parts and labor warranty and is tested before it leaves the shop.
No. Flexa Systems is an independent repair company, not affiliated with Rockwell Automation or Allen-Bradley. We repair PanelView terminals at component level and back the work with our own 2-year warranty.
Allen-Bradley, PanelView and Rockwell Automation are trademarks of Rockwell Automation, Inc. Flexa Systems LLC is an independent repair company and is not affiliated with, endorsed by, or authorized by Rockwell Automation.
Component-level repair for every major industrial automation brand — including discontinued and obsolete systems.
SINAMICS · S7 · SIMATIC
View repairs →Drives · Servos · Motion
View repairs →ACS · ACH Series
View repairs →CNC · Servo · Spindle
View repairs →RX3i · RX7i · 90-30 · VersaMax
View repairs →MELSEC · FR Series
View repairs →590 DC · 690 AC · 890 Vector
View repairs →Drives · I/O Systems
View repairs →VLT · FC Series
View repairs →FRENIC · MONITOUCH · FALDIC
View repairs →Sysmac · NJ · NX · CS1
View repairs →