Can I buy a conga-QEVAL/Qseven 2.0 x86 from Flexa Systems?

Yes. Flexa Systems sells the conga-QEVAL/Qseven 2.0 x86 outright — refurbished units reconditioned to OEM specifications and, where available, brand new stock. Units ship from our Lewisville, Texas facility to anywhere in the United States, and every unit we sell carries a 2-year warranty covering parts and labor. Current availability and pricing are shown on this page.

Does a conga-QEVAL/Qseven 2.0 x86 purchased from Flexa Systems come with a warranty?

Yes. Every conga-QEVAL/Qseven 2.0 x86 that Flexa Systems sells — refurbished or brand new — includes a 2-year (24-month) warranty covering parts and labor, starting on the date the unit ships from our facility. The same 2-year warranty applies to units we repair. Each unit is fully tested under load before it leaves our Lewisville, Texas facility.

How long does conga-QEVAL/Qseven 2.0 x86 repair take?

Standard turnaround for conga-QEVAL/Qseven 2.0 x86 repair is 5–30 business days from the day we receive the unit. Rush service (24–72 hours) is available — contact us before shipping.

Does the conga-QEVAL/Qseven 2.0 x86 repair come with a warranty?

Yes. All conga-QEVAL/Qseven 2.0 x86 repair, refurbished, and brand new units sold by Flexa Systems include a 2-year warranty covering parts and labor. Units are fully tested before shipping.

Can I get a quote before sending my conga-QEVAL/Qseven 2.0 x86?

Yes. Use the Get Quote for Repair button on this page or contact us directly. We provide a free diagnostic estimate once we receive the unit. No repair charges if you decide not to proceed.

congatec

conga-QEVAL/Qseven 2.0 x86

SKU: 2100000024421

$990.00

2-Year Warranty

Free Diagnostics

Ships in 1–2 Business Days

Nationwide Service

congatec conga-QEVAL/Qseven 2.0 x86 repair service is available at Flexa Systems for facilities experiencing board-level failures, communication dropouts, or power-related faults on this evaluation carrier platform — and our team also stocks conga-QEVAL/Qseven 2.0 x86 refurbished units for faster turnaround when downtime is critical. The conga-QEVAL/Qseven 2.0 x86 is an evaluation carrier board built to the Qseven 2.0 form factor standard, providing a full-featured test and development platform for congatec x86 compute modules using the MXM-style 314-pin Qseven edge connector. Engineers searching for conga-QEVAL/Qseven 2.0 x86 troubleshooting support will find this board exposes all major Qseven interfaces including USB 3.0, SATA III, PCIe x1 lanes, LVDS dual-channel display, GbE, and HD Audio for comprehensive subsystem validation. The carrier is frequently deployed in industrial automation prototyping environments, embedded control system development labs, and factory floor HMI validation setups where x86 compute module performance must be verified before production deployment. Those asking where to repair congatec VFD or embedded compute hardware in the southern US will find Flexa Systems operates out of Lewisville TX with nationwide shipping and depot repair capabilities. Our industrial VFD repair and embedded board repair technicians perform component-level diagnosis including BIOS/UEFI flash verification, power rail analysis using precision bench instrumentation, and connector integrity testing on the Qseven edge interface. For operations needing to buy conga-QEVAL/Qseven 2.0 x86 USA with confidence, Flexa Systems offers free diagnostics on all inbound units and backs every repair with a 2-year warranty on parts and labor.

Technical Specifications

Part Number	conga-QEVAL/Qseven 2.0 x86
Manufacturer	congatec
Package / Type	Circuit Board

Compatibility

The conga-QEVAL/Qseven 2.0 x86 is compatible with all congatec Qseven 2.0 compute modules that utilize the standard 314-pin MXM edge connector, including the conga-QA5 (AMD LX800), conga-QMX6 (NXP i.MX6), conga-QA3 (AMD G-Series T40E/T56N), and conga-QBD (Intel Bay Trail E3825/E3845) — making congatec conga-QEVAL/Qseven 2.0 x86 integration straightforward across multiple processor architectures. The board supports standard PC/104, Mini-PCIe, and SIM card expansion slots, allowing compatibility with industrial fieldbus adapter cards including those implementing CANbus, RS-485 Modbus RTU, and EtherCAT physical layers for automation network testing. Engineers evaluating the conga-QEVAL/Qseven 2.0 x86 as a conga-QEVAL/Qseven 2.0 x86 replacement for earlier Qseven 1.2 carrier designs should note that Qseven 2.0 modules require 5V supply rail support and add USB 3.0 signaling, which the conga-QEVAL carrier fully provides. The platform is also compatible with LVDS panels up to 24-bit dual-channel, eDP display configurations via adapter, and standard ATX power supplies, making it suitable for integration with Beckhoff IPC panel systems and Kontron-compatible embedded development workflows.

Service Options

Repair Service

Ship your faulty conga-QEVAL/Qseven 2.0 x86 to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.

Refurbished

In-stock congatec conga-QEVAL/Qseven 2.0 x86 variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.

Brand New

New conga-QEVAL/Qseven 2.0 x86 in original congatec packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.

Common Failure Modes

Intermittent Qseven module no-POST condition during cold-start cycles due to degraded bypass capacitors on the 5V standby rail — a documented conga-QEVAL/Qseven 2.0 x86 fault seen when the carrier board has been stored or operated in high-humidity environments above 85% RH.
SATA III link negotiation failure dropping to SATA I speeds (1.5 Gb/s) after thermal cycling, traced to cold solder joints on the JMicron SATA controller IC — conga-QEVAL/Qseven 2.0 x86 troubleshooting should begin with a reflux inspection of U-area SATA routing under magnification.
USB 3.0 SuperSpeed enumeration errors (device descriptor request failed, Code 43) on the rear panel Type-A ports caused by ESD damage to the USB 3.0 redriver IC, typically occurring when modules are hot-swapped without proper electrostatic discharge precautions on the bench.
GbE link failure presenting as 'cable unplugged' despite confirmed good cable, resulting from transformer coupling degradation in the RJ45 magnetics assembly — common on conga-QEVAL carrier boards that have accumulated more than 3 years of continuous lab bench operation.

Frequently Asked Questions

Is the conga-QEVAL/Qseven 2.0 x86 compatible with or interchangeable with other Qseven carrier boards from different manufacturers?

The conga-QEVAL/Qseven 2.0 x86 is compatible with any Qseven 2.0-compliant compute module regardless of manufacturer, meaning modules from Kontron (such as the Kontron COMe-bSL6) or Seco boards designed to the SGET Qseven 2.0 specification will physically and electrically mate with the carrier — however, BIOS compatibility and driver support must be validated per module. For engineers considering the conga-QEVAL/Qseven 2.0 x86 as a replacement for legacy Qseven 1.2 carriers like the earlier congatec conga-QEVAL/Qseven 1.2 revision, the primary functional difference is the addition of USB 3.0 differential pairs and the 5V supply requirement on Pin 314. The board is not a drop-in replacement for COM Express or SMARC carrier form factors, as those use entirely different connector standards and power architectures.

How do I determine whether my conga-QEVAL/Qseven 2.0 x86 is repairable or needs to be replaced outright?

In most cases, conga-QEVAL/Qseven 2.0 x86 repair is viable when the failure is isolated to discrete components such as the power management ICs, SATA or USB controllers, or the RJ45 magnetics — these are component-level faults that bench technicians can address without replacing the entire carrier. However, if the congatec conga-QEVAL/Qseven 2.0 x86 shows physical damage to the Qseven 314-pin edge connector (bent or broken pins, delaminated PCB traces at the mating zone) or has sustained direct lightning-induced surge damage across multiple interface layers simultaneously, board replacement is typically more cost-effective. Signs that repair is worthwhile include a single failed subsystem (e.g., GbE only, or USB only) with all other interfaces confirming normal operation during diagnostics — send the board in for free evaluation and our engineers will provide a written fault report.

Where can I get conga-QEVAL/Qseven 2.0 x86 repair service with a warranty?

Flexa Systems in Lewisville TX provides depot-level conga-QEVAL/Qseven 2.0 x86 repair service with a 2-year warranty on all repaired and refurbished units, covering both parts and labor from the date the unit ships back to you. Standard turnaround is 5-7 business days from receipt of the board, with expedited options available for production-critical situations, and we provide nationwide shipping with prepaid return labels for qualifying repairs. Facilities looking to buy conga-QEVAL/Qseven 2.0 x86 USA from a stocking repair depot rather than waiting on international distributor lead times can contact Flexa Systems directly for current refurbished inventory. All inbound units receive free diagnostics with a detailed fault report issued before any repair work is authorized, so you always know the root cause before committing to service costs.

Where can I get conga-QEVAL/Qseven 2.0 x86 repair service with a warranty?

Flexa Systems provides professional conga-QEVAL/Qseven 2.0 x86 repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.

Flexa Systems specializes in congatec conga-QEVAL/Qseven 2.0 x86 variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.

Repair option: component-level repair is available for this model — free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Request a repair quote.

Technical Specifications

Part Number:	conga-QEVAL/Qseven 2.0 x86
Manufacturer:	congatec
Type:	Circuit Board

conga-QEVAL/Qseven 2.0 x86

Technical Specifications

Ask for Price

Trade-In Program

You May Also Need