Can I buy a conga-QA3/E3845-4G eMMC16 from Flexa Systems?

Yes. Flexa Systems sells the conga-QA3/E3845-4G eMMC16 outright — refurbished units reconditioned to OEM specifications and, where available, brand new stock. Units ship from our Lewisville, Texas facility to anywhere in the United States, and every unit we sell carries a 2-year warranty covering parts and labor. Current availability and pricing are shown on this page.

Does a conga-QA3/E3845-4G eMMC16 purchased from Flexa Systems come with a warranty?

Yes. Every conga-QA3/E3845-4G eMMC16 that Flexa Systems sells — refurbished or brand new — includes a 2-year (24-month) warranty covering parts and labor, starting on the date the unit ships from our facility. The same 2-year warranty applies to units we repair. Each unit is fully tested under load before it leaves our Lewisville, Texas facility.

How long does conga-QA3/E3845-4G eMMC16 repair take?

Standard turnaround for conga-QA3/E3845-4G eMMC16 repair is 5–30 business days from the day we receive the unit. Rush service (24–72 hours) is available — contact us before shipping.

Does the conga-QA3/E3845-4G eMMC16 repair come with a warranty?

Yes. All conga-QA3/E3845-4G eMMC16 repair, refurbished, and brand new units sold by Flexa Systems include a 2-year warranty covering parts and labor. Units are fully tested before shipping.

Can I get a quote before sending my conga-QA3/E3845-4G eMMC16?

Yes. Use the Get Quote for Repair button on this page or contact us directly. We provide a free diagnostic estimate once we receive the unit. No repair charges if you decide not to proceed.

congatec

conga-QA3/E3845-4G eMMC16

SKU: 2100000024445

$1,500.00

2-Year Warranty

Free Diagnostics

Ships in 1–2 Business Days

Nationwide Service

conga-QA3/E3845-4G eMMC16 repair service is available through Flexa Systems for facilities that depend on congatec's Qseven form-factor computer-on-module platform in motion control and automation infrastructure — and our congatec conga-QA3/E3845-4G eMMC16 repair process includes evaluation of conga-QA3/E3845-4G eMMC16 refurbished units to factory-equivalent performance standards before any module leaves our bench. Built around the Intel Atom E3845 quad-core processor running at 1.91 GHz with 4GB LPDDR3 onboard RAM and 16GB eMMC flash storage, this module handles real-time supervisory tasks, HMI logic, and drive coordination in demanding plant environments including food processing, packaging lines, and HVAC system control. Engineers searching for conga-QA3/E3845-4G eMMC16 troubleshooting support often discover that eMMC flash wear, caused by excessive write cycles during high-frequency data logging, is the underlying cause of boot failures that initially appear to be VFD faults. The module interfaces with variable frequency drive control architectures through its PCIe, USB 3.0, and LVDS lanes, making it a critical compute node in multi-axis systems where drive parameters must be stored and executed reliably. Industrial VFD repair specialists at Flexa Systems understand how this module's failure directly cascades into drive faults and motor trip events, which is why we treat the conga-QA3/E3845-4G eMMC16 as a drive-system component rather than a standalone board. If you've been searching for conga-QA3/E3845-4G eMMC16 repair near me, our Texas-based facility in Lewisville TX ships repaired and tested units nationwide with documented burn-in test results included. We offer free diagnostics on every unit received, so you know exactly what failed before committing to a repair or replacement path.

Technical Specifications

Part Number	conga-QA3/E3845-4G eMMC16
Manufacturer	congatec
Package / Type	Circuit Board

Compatibility

The conga-QA3/E3845-4G eMMC16 is compatible with congatec Qseven 2.0 carrier boards including the conga-QEVAL/Qseven evaluation carrier and custom OEM baseboard designs that expose PCIe x1, SDIO, I2C, and SPI interfaces for peripheral integration with drive controllers. congatec conga-QA3/E3845-4G eMMC16 integration has been validated in systems communicating over EtherCAT and PROFIBUS DP networks, where the module runs the master stack or HMI application layer sitting above Beckhoff EK1100 couplers or Siemens S7-1200 PLC families acting as subordinate field devices. The conga-QA3/E3845-4G eMMC16 replacement for earlier congatec Qseven modules such as the conga-QA3/E3800 and conga-QA3/E3827 is mechanically direct given the shared Qseven 2.0 connector pinout, though BIOS and driver validation is required when swapping between SKUs. It is also conga-QA3/E3845-4G eMMC16 compatible with Windows Embedded Standard 7, Windows 10 IoT Enterprise, and Yocto-based Linux BSPs that congatec provides, ensuring continuity with existing SCADA or drive-parameter management software running on the production line.

Service Options

Repair Service

Ship your faulty conga-QA3/E3845-4G eMMC16 to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.

Refurbished

In-stock congatec conga-QA3/E3845-4G eMMC16 variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.

Brand New

New conga-QA3/E3845-4G eMMC16 in original congatec packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.

Common Failure Modes

eMMC flash corruption causing failure to boot past POST — a known conga-QA3/E3845-4G eMMC16 fault pattern in applications where the module powers down without a clean OS shutdown, progressively degrading the MLC NAND cells in the Kingston or Micron eMMC device onboard.
Thermal throttling of the Intel Atom E3845 core to below 800 MHz due to heatspreader delamination or dried thermal interface material, resulting in real-time Ethernet packet loss and EtherCAT cycle overruns that are misdiagnosed as network faults rather than a compute module issue.
LPDDR3 memory single-bit errors triggering OS kernel panics under sustained 100% CPU load — conga-QA3/E3845-4G eMMC16 troubleshooting in these cases requires running memtest86+ from an external USB source to isolate RAM failure from eMMC or BSP issues.
PCIe lane signal integrity degradation caused by BGA solder joint micro-cracking at the Qseven connector interface, presenting as intermittent loss of the downstream expansion device — typically a PCIe-based fieldbus card — which logs as a drive communication fault at the supervisory control level.

Frequently Asked Questions

Is the conga-QA3/E3845-4G eMMC16 compatible with other congatec Qseven modules, and can it replace modules from other manufacturers?

The conga-QA3/E3845-4G eMMC16 compatible with all Qseven 2.0 specification-compliant carrier boards means it can physically replace modules like the congatec conga-QA3/E3827-4G and the conga-QA3/E3826 on the same baseboard without mechanical modification. For cross-manufacturer replacement, the Qseven 2.0 standard also makes the conga-QA3/E3845-4G eMMC16 interchangeable with modules from Kontron and MSC Technologies that use the same 314-pin MXM-style connector, provided the carrier board's power sequencing and BIOS initialisation tolerances are confirmed compatible. You will need to update the BSP and validate peripheral enumeration, particularly for USB 3.0 and PCIe endpoints, before deploying the swap in a live control system. Always confirm the operating system image and any proprietary drive-parameter management application are re-validated after a module substitution.

How do I know whether my conga-QA3/E3845-4G eMMC16 is worth repairing or should be replaced outright?

A congatec conga-QA3/E3845-4G eMMC16 with eMMC flash corruption, PCIe BGA joint failure, or thermal interface degradation is typically a strong candidate for conga-QA3/E3845-4G eMMC16 repair rather than outright replacement, since the base compute silicon and power regulation circuitry on these modules are generally long-lived when the root cause is addressed. Units that have suffered liquid ingress, physical connector damage to the Qseven edge interface, or LPDDR3 failures affecting multiple banks are more likely to require a full replacement, as reflowing the BGA RAM package without controlled reflow equipment introduces additional risk. Send the module in for evaluation — our technicians will document exactly which subsystem has failed and provide a repair-versus-replace recommendation before any work is authorised. Catching a failing eMMC early, when the module still partially boots, gives repair technicians the best opportunity to recover firmware and parameter data before the flash degrades further.

Where can I get conga-QA3/E3845-4G eMMC16 repair service with a warranty?

Flexa Systems, located in Lewisville TX, provides conga-QA3/E3845-4G eMMC16 repair service with a 2-year warranty on all completed repairs, covering both parts and labour from the date the unit ships back to you. We offer free diagnostics on every unit received, and most repairs are completed and returned within 5 to 7 business days, minimising production downtime for facilities that cannot carry a spare module. Our nationwide shipping programme means that regardless of where your plant is located, you can ship a failed unit directly to our Texas facility and receive a tested, documented replacement without needing a local congatec-affiliated service centre. If you need to buy conga-QA3/E3845-4G eMMC16 USA stock as a spare or have a conga-QA3/E3845-4G eMMC16 for sale that you'd like evaluated for exchange credit, contact Flexa Systems directly to discuss available inventory and exchange options.

Where can I get conga-QA3/E3845-4G eMMC16 repair service with a warranty?

Flexa Systems provides professional conga-QA3/E3845-4G eMMC16 repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.

Flexa Systems specializes in congatec conga-QA3/E3845-4G eMMC16 variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.

Repair option: component-level repair is available for this model — free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Request a repair quote.

Technical Specifications

Part Number:	conga-QA3/E3845-4G eMMC16
Manufacturer:	congatec
Type:	Circuit Board

conga-QA3/E3845-4G eMMC16

Technical Specifications

Ask for Price

Trade-In Program

You May Also Need