20AD022F3AYNAEC1Allen-Bradley PowerFlex 70 VFD
Buying 20AD022F3AYNAEC1 from Flexa Systems
Buy the Allen-Bradley 20AD022F3AYNAEC1 PowerFlex 70 VFD, in stock refurbished and available brand new on request, or send yours to Flexa Systems for repair. This PowerFlex 70 drive is rated for a 480 VAC three-phase supply, 22 A and 15 Hp (11 kW), a size often used for pumps, fans and conveyor motors on plant three-phase lines. Before installing a replacement, compare the motor nameplate against the 15 Hp / 22 A rating and confirm the line is 480 VAC. Then reload your saved parameter set so the drive runs the motor the same way as the unit it replaces. Each drive is tested before it ships and carries a 2-year warranty, and the refurbished unit typically costs 30-60% less than brand new.
Repair option: send in your faulty unit for component-level repair — $1,650.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our Allen-Bradley PowerFlex repair and VFD repair service.
20AD022F3AYNAEC1 at a glance
| Part Number: | 20AD022F3AYNAEC1 |
| Manufacturer: | ALLEN BRADLEY |
| Voltage: | 480 VAC 3 Phases |
| Current: | 22 AMP |
| Power: | 15Hp 11 KW |
| Type: | POWERFLEX 70 |
| Output Frequency: | 0-400 Hz standard, 0-500 Hz with Enhanced Control |
| Control Modes: | V/Hz, sensorless vector, closed-loop vector |
| Communication: | EtherNet/IP, Modbus RTU |
| Safety: | Safe Torque Off (DriveGuard option) |
| Enclosure: | IP20 NEMA 1 |
| Software: | DriveExplorer / DriveTools SP (now Connected Components Workbench) |
20AD022F3AYNAEC1 FAQ
What should I match before swapping in a 20AD022F3AYNAEC1?
Check that the motor nameplate horsepower and current fit within 15 Hp (11 kW) and 22 A, and that the supply is 480 VAC three-phase. Back up the parameters from your existing PowerFlex 70 so you can load them into the replacement.
Should I buy the 20AD022F3AYNAEC1 refurbished or brand new?
A refurbished unit is in stock and keeps the same 480 VAC, 22 A, 15 Hp ratings at a lower cost. A brand-new 20AD022F3AYNAEC1 is available on request if your project requires an unused drive.
Can I trade in a failed PowerFlex 70 20AD022F3AYNAEC1?
Yes. Use the Trade-In button on this page to get a free evaluation. Any credit is applied toward your purchase.
Compatible alternatives
Equivalent units from other manufacturers — all in-stock at Flexa, covered by the same 2-year warranty.








