Esc close · ↑↓ navigate · ↵ open · ⌘K / Ctrl+K reopen
Allen-Bradley
2097-V31PR2
No reviews
SKU: 2100000025626
Repair service price — send us your unit
$1,140.00
Contact us for pricing
2-Year Warranty
Free Diagnostics
5–30 Day Turnaround
Nationwide Service
2097-V31PR2 repair service is available at Flexa Systems for one of the most compact and capable units in the Allen Bradley Kinetix 300 servo drive family — and our team handles ALLEN BRADLEY 2097-V31PR2 repair alongside stocking 2097-V31PR2 refurbished units ready for immediate deployment. Rated at 0.80 kW with a 4.0 A continuous output current and accepting 120/240 VAC single-phase input, this drive is engineered for precise motion control in space-constrained machine tool, packaging, and assembly automation environments. Technicians searching for 2097-V31PR2 troubleshooting support will find this unit most commonly fails following power surges, cooling failures, or improper parameter configuration that trips internal protection circuits. The Kinetix 300 platform uses an integrated motion-over-EtherNet/IP architecture, making 2097-V31PR2 fault codes diagnosable directly through the Studio 5000 Logix Designer environment with minimal downtime when proper drive configuration files are retained. Industrial VFD repair on this series requires familiarity with the drive's onboard indexing motion engine, which can store up to 32 programmed motion tasks without an external motion controller. If your facility is located outside our Lewisville TX headquarters, Flexa Systems extends nationwide shipping and service so geography is never a barrier to getting your machine back online. Our free diagnostics evaluation determines within 24 hours whether your unit is a candidate for board-level repair or requires component exchange, saving facilities the cost of unnecessary replacements.
Technical Specifications
Part Number
2097-V31PR2
Manufacturer
ALLEN BRADLEY
Voltage
120/240 VAC Single-Phase
Current Rating
4.0 A
Power Rating
0.80 kW
Package / Type
KINETIX 300
Compatibility
The 2097-V31PR2 is compatible with Allen Bradley ControlLogix and CompactLogix PLC families communicating over EtherNet/IP, and ALLEN BRADLEY 2097-V31PR2 integration is supported natively within the Studio 5000 Logix Designer environment using the Kinetix 300 Add-On Profile. For motor feedback, the drive accepts incremental encoders (5V differential TTL) and is specifically matched to Allen Bradley MPL-series and TL-series servo motors, including models such as TLY-A120T-BJ62AA and MPL-A1510V-HJ22AA. The 2097-V31PR2 serves as a direct 2097-V31PR2 replacement for other single-axis Kinetix 300 variants including the 2097-V31PR0 and 2097-V32PR2, provided firmware and power ratings are verified prior to substitution. Ethernet-based motion coordination with the 1756-L73 and 1756-L74 ControlLogix processors is fully supported, and the drive's USB configuration port allows parameter backup and restore using the Kinetix 300 Drive Configuration Software.
Service Options
Repair Service
Ship your faulty 2097-V31PR2 to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.
Refurbished
In-stock ALLEN BRADLEY 2097-V31PR2 variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.
Brand New
New 2097-V31PR2 in original ALLEN BRADLEY packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.
Common Failure Modes
DC bus overvoltage fault (E22) triggered during deceleration when no dynamic braking resistor is configured — particularly common in 2097-V31PR2 units driving high-inertia loads with ramp-down times under 500 ms.
Overcurrent fault (E10) at startup caused by degraded IGBT gate driver circuitry on the power board, a known wear-out failure mode in 2097-V31PR2 troubleshooting scenarios where the drive has accumulated high thermal cycling hours.
Loss of encoder feedback fault (E28) resulting from damaged differential receiver ICs on the feedback interface board, typically caused by ground loop currents when motor and drive chassis grounds are not bonded at a single point.
Undervoltage fault (E20) appearing intermittently under load due to failing input rectifier diodes or deteriorated bulk capacitors on the DC bus, most frequently observed in 2097-V31PR2 fault logs from units operating in environments with line voltage below 108 VAC.
Frequently Asked Questions
Is the 2097-V31PR2 compatible with or interchangeable with other Kinetix or PowerFlex drives?
The 2097-V31PR2 compatible with designation applies strictly within the Kinetix 300 single-axis servo drive family — it is not pin-for-pin interchangeable with PowerFlex 40 or PowerFlex 525 drives because those platforms use V/Hz or sensorless vector control rather than closed-loop servo control with encoder feedback. Within the Kinetix ecosystem, the 2097-V31PR2 replacement for the 2097-V31PR0 is feasible when the application requires the same 120/240 VAC single-phase input and the connected motor's continuous stall current does not exceed 4.0 A. Engineers migrating from an older Kinetix 6000 2094-BC01-MP5 single-axis module should be aware that wiring, feedback connector pinouts, and configuration procedures differ substantially and a full re-commissioning is required. Always cross-reference the motor's rated bus voltage and peak current demands against the 2097-V31PR2 datasheet before treating any drive as a functional substitute.
How do I know if my 2097-V31PR2 is worth repairing or if I should replace it outright?
ALLEN BRADLEY 2097-V31PR2 units are generally good candidates for 2097-V31PR2 repair when the fault history shows electronic failures — such as IGBT damage, failed gate drivers, degraded capacitors, or corrupted firmware — rather than physical destruction of the chassis, burned PCB traces across multiple boards, or water intrusion damage that has corroded connector contacts and solder joints beyond cleaning. If the drive powers up and displays a readable fault code, that is a strong indicator that the control board is intact and the failure is isolated to the power stage or a peripheral circuit, which significantly reduces repair cost and turnaround time. Drives that show no display, no response on the USB configuration port, and no DC bus voltage after confirmed good input power are more complex repairs but still frequently recoverable at the board level by experienced technicians. We recommend sending the unit in for free diagnostics before making a purchase decision on a new or refurbished replacement, as repair is typically 40–60% of replacement cost on this model.
Where can I get 2097-V31PR2 repair service with a warranty?
Flexa Systems, based in Lewisville TX, provides depot-level 2097-V31PR2 repair service backed by a 2-year warranty on all repaired and refurbished units, with a standard turnaround of 5–7 business days from receipt of the drive. Our nationwide service model means customers across the continental US can ship their unit directly to our facility, and we provide a detailed repair report documenting every component replaced and every test performed before return shipment. For facilities that need an immediate swap while their original unit is being repaired, we carry 2097-V31PR2 for sale from our refurbished inventory, allowing production to resume the same day a replacement ships. If you are searching for buy 2097-V31PR2 USA options with verified test documentation and warranty coverage, contact Flexa Systems directly for current stock availability and lead times.
Where can I get 2097-V31PR2 repair service with a warranty?
Flexa Systems provides professional 2097-V31PR2 repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.
Flexa Systems specializes in ALLEN BRADLEY 2097-V31PR2 variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.
Repair option: send in your faulty unit for component-level repair — $1,140.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our Kinetix 300 repair and servo drive repair service.
