GV6-L3E
Buying GV6-L3E from Flexa Systems
Buy the Parker GV6-L3E servo drive, in stock refurbished and available brand new on request, or send yours to Flexa Systems for repair. This drive takes a 110 VAC single-phase supply and carries a 3/7.5 A current rating, so it fits axes in cabinets where only 110 VAC single-phase power is wired. Before ordering, read the label on the unit you are replacing and confirm it shows the same 110 VAC 1 Phase input and 3/7.5 A rating, because the motor on that axis was sized and tuned around those figures. Every refurbished GV6-L3E is tested before it leaves Lewisville, is covered by a 2-year warranty, and typically costs 30-60% less than a brand new unit.
Repair option: send in your faulty unit for component-level repair — $1,150.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our Parker Gemini repair and servo drive repair service.
GV6-L3E at a glance
| Part Number: | GV6-L3E |
| Manufacturer: | Parker |
| Voltage: | 110 VAC 1 Phase |
| Current: | 3/7.5 AMP |
| Type: | GEMINI SERIES |
GV6-L3E FAQ
What should I match before swapping in a replacement GV6-L3E?
Confirm the servo motor and its feedback device are the same ones the original drive was set up for, and that the supply is 110 VAC single-phase. If the old drive still communicates, back up its parameters first so the tuning and settings can be loaded into the replacement.
Is a refurbished GV6-L3E a good alternative to a brand new one?
Refurbished GV6-L3E drives are in stock and carry the same 110 VAC 1 Phase and 3/7.5 A ratings, making them the quickest way to get a stopped axis running. Brand new units are available on request if your maintenance policy requires unused stock.
Can I trade in a failed GV6-L3E servo drive?
Yes. Use the Trade-In button on this page for a free evaluation of your unit. Credit is applied toward the purchase.
