Esc close · ↑↓ navigate · ↵ open · ⌘K / Ctrl+K reopen
Siemens
6SE9213-6CA40
No reviews
SKU: 2100000019441
$2,100.00
Contact us for pricing
2-Year Warranty
Free Diagnostics
5–30 Day Turnaround
Nationwide Service
Repair option: send in your faulty unit for component-level repair — $1,950.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our VFD repair service.
6SE9213-6CA40 repair service is available for the Siemens MICROMASTER MM75/2, a compact AC frequency inverter engineered to deliver precise speed and torque control of 3-phase AC motors up to 0.75 kW (1 hp) at 230 V single-phase input — and whether you need Siemens 6SE9213-6CA40 repair or a tested 6SE9213-6CA40 refurbished unit, Flexa Systems has you covered. Rated at 3.90 A output current, this inverter was widely deployed across light manufacturing, conveyor systems, pump control, and HVAC fan applications throughout the 1990s and early 2000s. If you've been searching for 6SE9213-6CA40 repair near me, our facility in Lewisville, TX performs full component-level diagnostics and rework on this exact model, with nationwide shipping turnaround typically within 5–7 business days. The MM75/2 series uses V/Hz open-loop control with programmable ramp times, making it suitable for applications where soft-start and variable speed operation are critical to process stability. 6SE9213-6CA40 troubleshooting can be complex due to the age of the platform and limited availability of original firmware and gate driver components, which is why depot-level industrial VFD repair by experienced technicians is strongly recommended over field replacement. The unit's compact DIN-rail-mountable form factor and built-in EMC filter made it popular in panel-space-constrained installations, but those same design characteristics can trap heat and accelerate capacitor aging. Flexa Systems stocks legacy components specific to this drive family, allowing us to restore units that other shops decline to touch.
Technical Specifications
Part Number
6SE9213-6CA40
Manufacturer
Siemens
Voltage
230 V
Current Rating
3.90
Package / Type
AC VFD MICROMASTER series
Compatibility
The 6SE9213-6CA40 is compatible with standard 3-phase induction motors with NEMA 48 or IEC 63/71 frame sizes operating at 230 V, and Siemens 6SE9213-6CA40 integration with basic PLC control is achieved via its analog 0–10 V or 4–20 mA speed reference input and discrete digital I/O terminals that interface directly with Siemens S7-200 and S7-300 series PLCs without additional signal conditioning. The drive supports serial USS protocol communication, allowing parameter access and control from Siemens OP3 or OP7 operator panels as well as PC-based tools running the MICROMASTER Drive Monitor software. As a 6SE9213-6CA40 replacement for earlier MM3 series units such as the 6SE9211-5CA40 or 6SE9215-6CA40, it shares the same terminal layout and parameter structure, simplifying panel retrofits without rewiring. Input line reactors from the Siemens 4EP3 series are recommended upstream of this drive to reduce harmonic distortion and protect the rectifier bridge, particularly in installations fed from weak or shared distribution transformers.
Service Options
Repair Service
Ship your faulty 6SE9213-6CA40 to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.
Refurbished
In-stock Siemens 6SE9213-6CA40 variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.
Brand New
New 6SE9213-6CA40 in original Siemens packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.
Common Failure Modes
DC bus overvoltage fault (F002) triggered on deceleration when ramp-down time is set below 2 seconds — a recurring issue in 6SE9213-6CA40 units driving high-inertia loads without a braking resistor installed.
Electrolytic DC bus capacitor degradation causing erratic output voltage and undervoltage fault (F001) trips, particularly in units that have been in service for more than 10 years or stored in high-humidity environments — one of the most common findings during 6SE9213-6CA40 troubleshooting at the component level.
Gate driver IGBT module failure resulting in a persistent overcurrent fault (F004) at startup, often caused by short-circuit events on the motor output terminals or extended operation with undersized motor cables lacking proper shielding.
Loss of the onboard parameter EEPROM data following a power surge, causing the 6SE9213-6CA40 fault display to show F007 (parameter error) and preventing the drive from running until factory defaults are manually restored via the BOP keypad or USS interface.
Frequently Asked Questions
Is the 6SE9213-6CA40 compatible with or interchangeable with other Siemens MICROMASTER models or third-party drives?
The 6SE9213-6CA40 compatible with designation extends most directly to other MM75/2 and MICROMASTER Vector series units sharing the same 230 V, sub-1 kW power class, including the 6SE9213-6CA41 (with integrated filter) and the 6SE3121-4BA40 from the earlier MICROMASTER ECO line, which share similar terminal assignments. For cross-brand 6SE9213-6CA40 replacement scenarios, technicians have successfully substituted the ABB ACS150-01E-04A7-2 and the Danfoss FC-051 in the same power class, though parameter remapping and I/O wiring adjustments are required since neither uses USS protocol natively. Always verify motor nameplate current against the replacement drive's rated output before commissioning, as a mismatch in current rating will cause nuisance overcurrent faults. Flexa Systems can advise on direct-fit alternatives if the original unit is beyond economical repair.
How do I know if my 6SE9213-6CA40 is worth repairing or if I should replace it?
A Siemens 6SE9213-6CA40 is generally a strong candidate for 6SE9213-6CA40 repair when the fault condition is limited to failed DC bus capacitors, a damaged gate driver board, corrupted EEPROM, or blown input rectifier diodes — all of which are component-level failures that a qualified depot can resolve at a fraction of new-unit cost. However, units with physically cracked PCB substrates, burned power traces, or IGBT modules that have vented or delaminated are typically beyond economical restoration. Because this model has been discontinued by Siemens, sourcing a new OEM replacement directly is no longer straightforward, which shifts the cost-benefit equation further toward depot repair for mechanically intact housings. If your drive displays fault codes F004 or F006 repeatedly after reset attempts, that is a strong indicator of a power stage failure that warrants professional evaluation before further operation damages the connected motor.
Where can I get 6SE9213-6CA40 repair service with a warranty?
Flexa Systems, based in Lewisville, TX, provides depot-level 6SE9213-6CA40 repair service with a 2-year warranty on all completed repairs, covering both parts and labor — one of the longest warranty terms available for legacy Siemens VFD work in the industry. We offer free diagnostics on every unit received, so you'll receive a detailed fault report and firm repair quote before any work begins. Turnaround is typically 5–7 business days, and we ship nationwide, making it practical for facilities anywhere in the US to send in a failed unit without sourcing local alternatives. Customers looking to buy 6SE9213-6CA40 USA stock can also inquire about our inventory of tested refurbished units, which are load-tested prior to shipment and carry the same 2-year warranty as our repair work.
Where can I get 6SE9213-6CA40 repair service with a warranty?
Flexa Systems provides professional 6SE9213-6CA40 repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.
Flexa Systems specializes in Siemens 6SE9213-6CA40 variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.
Technical Specifications
Part Number:
6SE9213-6CA40
Manufacturer:
Siemens
Voltage:
230 V
Current:
3.90
Type:
AC VFD MICROMASTER series
Ask for Price
Siemens - 6SE9213-6CA40
Trade-In Program
Siemens — 6SE9213-6CA40
✓Thank you — your request has been sent. We'll get back to you shortly.
