Esc close · ↑↓ navigate · ↵ open · ⌘K / Ctrl+K reopen
Siemens
6ES7 313-6CE01-0AB0
No reviews
SKU: 2100000019403
$1,450.00
Contact us for pricing
2-Year Warranty
Free Diagnostics
5–30 Day Turnaround
Nationwide Service
Repair option: send in your faulty unit for component-level repair — $1,300.00 with free diagnostics, a 2-year warranty, and a 5–30 business day turnaround. Repair typically costs 40–70% of a new unit, saving you 30–60%. Learn more about our PLC repair service.
6ES7 313-6CE01-0AB0 repair service is available for this advanced successor hardware and firmware revision of the Siemens SIMATIC S7-300 CPU 313C-2DP — a unit where Siemens 6ES7 313-6CE01-0AB0 repair demands precise component-level expertise, and where sourcing a 6ES7 313-6CE01-0AB0 refurbished unit from a qualified service provider can restore full functionality at a fraction of new-unit cost. Powered by a 24 VDC supply, this compact CPU module integrates onboard digital and analog I/O with a PROFIBUS-DP master/slave interface, making it a critical controller in process automation, material handling, and discrete manufacturing cells. Engineers searching for 6ES7 313-6CE01-0AB0 troubleshooting support should note that this unit's onboard DP interface, memory card slot, and MPI communication port all represent potential failure points after extended duty cycles or electrical transients. Understanding 6ES7 313-6CE01-0AB0 fault codes — particularly those logged in the CPU diagnostic buffer — is essential before condemning a unit, as many apparent failures trace back to corrupted firmware, failed NOVRAM, or degraded backup battery circuits rather than irreparable hardware damage. Industrial VFD repair and CPU module repair share a common diagnostic philosophy: accurate fault isolation before component replacement, which is why Flexa Systems conducts board-level inspection on every unit received. The 313C-2DP variant handles time-critical PROFIBUS-DP communication at up to 12 Mbit/s, and its onboard I/O — 16 digital inputs, 16 digital outputs, and integrated analog channels — makes it indispensable in legacy automation lines that cannot easily be migrated. Facilities wondering where to repair Siemens VFD and CPU modules without long OEM lead times will find that third-party repair is not only faster but fully viable when performed with proper test fixtures and Siemens-compatible programming tools.
Technical Specifications
Part Number
6ES7 313-6CE01-0AB0
Manufacturer
Siemens
Voltage
24 VDC
Package / Type
PLC SIMATIC S7-300
Compatibility
The Siemens 6ES7 313-6CE01-0AB0 integration fits directly within the S7-300 rack architecture, accepting standard S7-300 signal modules such as the SM 321 (6ES7 321-1BH02-0AA0), SM 331 (6ES7 331-7KF02-0AB0), and SM 332 (6ES7 332-5HF00-0AB0) on the same backplane without requiring interface modules for local rack expansion. This CPU is 6ES7 313-6CE01-0AB0 compatible with PROFIBUS-DP networks running DP masters and slaves including Siemens ET 200M (6ES7 153-1AA03-0XB0) and ET 200S distributed I/O stations, as well as third-party PROFIBUS devices adhering to IEC 61158 protocol standards. A direct 6ES7 313-6CE01-0AB0 replacement for the earlier 6ES7 313-6CE00-0AB0 (CPU 313C-2DP, prior hardware revision), it also operates within TIA Portal V13 SP2 and higher as well as STEP 7 V5.5 programming environments, maintaining project compatibility across revision changes. For communication topology, this CPU supports MPI networks at 187.5 kbit/s to 12 Mbit/s alongside its PROFIBUS-DP port, enabling coexistence with operator panels such as the Siemens TP700 Comfort (6AV2 124-0GC01-0AX0) and programming devices on shared network segments.
Service Options
Repair Service
Ship your faulty 6ES7 313-6CE01-0AB0 to our facility. Our certified technicians perform IGBT testing, capacitor inspection, gate driver diagnostics, and full load testing. Typical turnaround: 5–7 business days. 2-year warranty included.
Refurbished
In-stock Siemens 6ES7 313-6CE01-0AB0 variable frequency drive, reconditioned to OEM specifications and verified under load. Ships immediately. 2-year warranty included.
Brand New
New 6ES7 313-6CE01-0AB0 in original Siemens packaging. Full manufacturer warranty applies. Contact us to confirm availability and lead time.
Common Failure Modes
Corrupted NOVRAM causing the CPU to boot into STOP mode with diagnostic buffer entry 'W#16#4260' — a known 6ES7 313-6CE01-0AB0 fault pattern following uncontrolled power loss during a program write cycle, requiring NOVRAM chip replacement and full firmware reload.
PROFIBUS-DP master port communication dropout logged as OB86 (rack failure) with BEA bit set, typically caused by degraded line termination resistors on the onboard DP ASIC — 6ES7 313-6CE01-0AB0 troubleshooting should include scope measurement of the A/B differential signal lines before replacing the module.
Backup battery circuit failure causing persistent 'BATTF' LED indication and loss of retentive data areas (M, DB, timer, counter) on power cycle — traced in most inspected units to a corroded CR2032 holder or failed charging capacitor on the memory backup rail rather than the battery cell itself.
Onboard 24 VDC input filter capacitor failure causing internal 5 VDC logic supply to drop below 4.75 V threshold, producing intermittent CPU STOP trips and SF LED illumination without a consistent fault code — measurable at the backplane connector with the rack under load.
Frequently Asked Questions
Is the 6ES7 313-6CE01-0AB0 compatible with other S7-300 CPU models, and can it replace units from other manufacturers?
The 6ES7 313-6CE01-0AB0 is compatible with the broader S7-300 hardware ecosystem and is a direct hardware-revision successor to the 6ES7 313-6CE00-0AB0, meaning existing STEP 7 or TIA Portal projects can be downloaded without structural reprogramming in most cases. While it is not a pin-for-pin drop-in for CPUs outside the 313C-2DP family — such as the CPU 315-2DP (6ES7 315-2AH14-0AB0) or CPU 317-2DP (6ES7 317-2AK14-0AB0) — these units share the same rack, power supply, and signal module infrastructure, so a system redesign around this CPU is straightforward. Cross-manufacturer replacement from platforms like the Mitsubishi Q03UDE or Omron CJ2M would require full I/O remapping and network reconfiguration, as PROFIBUS-DP implementations differ at the GSD file and parameter assignment level. Always verify firmware version compatibility with existing expansion modules before substituting any S7-300 CPU variant.
How do I determine whether my 6ES7 313-6CE01-0AB0 is repairable or needs to be replaced outright?
A Siemens 6ES7 313-6CE01-0AB0 is generally a strong candidate for 6ES7 313-6CE01-0AB0 repair when faults are limited to NOVRAM corruption, failed backup battery circuits, degraded PROFIBUS termination components, or failed input filter capacitors — all of which are board-level repairs that restore full OEM functionality. Units with physical damage to the backplane connector, cracked PCB substrate from thermal cycling, or burned ASIC components from a sustained overvoltage event on the 24 VDC supply line are assessed case-by-case, as component sourcing for the DP communication ASIC can be a limiting factor. The most reliable first step is to extract the CPU diagnostic buffer via a STEP 7 or TIA Portal online connection (if the unit powers up at all) and document all logged system errors before shipping for evaluation. Flexa Systems offers free diagnostics on all received units, so customers receive a clear repair-vs.-replace assessment before any commitment.
Where can I get 6ES7 313-6CE01-0AB0 repair service with a warranty?
Flexa Systems, based in Lewisville TX, provides depot-level 6ES7 313-6CE01-0AB0 repair service with a 2-year warranty on all repaired and refurbished units, covering both parts and labor for the faults addressed during service. Standard turnaround is 5–7 business days from receipt, with expedited options available for production-critical situations, and the company ships nationwide to customers across the U.S. who need fast, qualified service without OEM lead times. For facilities that need an immediate spare while their unit is in repair, Flexa Systems maintains exchange inventory — customers searching to buy 6ES7 313-6CE01-0AB0 USA will find tested, warranted stock available for direct purchase or advance exchange. You can initiate a repair or request a quote directly through the Flexa Systems website, and free diagnostics are included with every unit submitted for evaluation.
Where can I get 6ES7 313-6CE01-0AB0 repair service with a warranty?
Flexa Systems provides professional 6ES7 313-6CE01-0AB0 repair service from our facility in Lewisville, TX, serving customers nationwide. Standard turnaround is 5–7 business days from receipt and all repaired units ship with a 2-year warranty. Rush service (2–3 business days) is also available.
Flexa Systems specializes in Siemens 6ES7 313-6CE01-0AB0 variable frequency drive repair, supplying refurbished and new units backed by a 2-year warranty. All drives are load-tested before shipping. Serving industrial facilities nationwide from Lewisville, TX.
Technical Specifications
Part Number:
6ES7 313-6CE01-0AB0
Manufacturer:
Siemens
Voltage:
24 VDC
Type:
PLC SIMATIC S7-300
Ask for Price
Siemens - 6ES7 313-6CE01-0AB0
Trade-In Program
Siemens — 6ES7 313-6CE01-0AB0
✓Thank you — your request has been sent. We'll get back to you shortly.
