Parker 690+0060/230/CNN | Repair & Stock
Parker 690+0060/230/CNN | Repair & Stock
Parker 690+0060/230/CNN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0060/230/CNN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0060/230/CNN | 60 HP 230V AC690+ VFD

The Parker 690+0060/230/CNN is a 60 HP variable frequency drive tailored for 230V systems, built in a chassis-style enclosure without a braking switch or system board. This straightforward configuration is ideal for OEMs or integrators who need raw drive power and prefer to manage logic and braking externally.

  • Drive Series: AC690+
  • Power Rating: 60 HP
  • Input Voltage: 230V (±10%), 50/60Hz
  • Frame Size: E
  • Enclosure Type: Chassis (IP20)
  • Brake Switch: Not included
  • System Board: Not installed

Repairable Faults and Issues We Commonly See:

  • ⚠️ Desaturation (DESAT) fault from power transistor failure
  • ⚠️ Stall trip due to high inertia or poor tuning
  • ⚠️ Overcurrent errors during ramp-up
  • ⚠️ Undervoltage on unstable 230V input supply
  • ⚠️ Short circuit between motor outputs or to ground
  • ⚠️ Ripple voltage warnings from aged capacitors
  • ⚠️ Overheating due to poor ventilation or ambient temps
  • ⚠️ Overspeed fault from encoder signal drop
  • ⚠️ No output due to drive logic corruption
  • ⚠️ EEPROM failure on configuration save
  • ⚠️ 24V output short from overloaded external devices
  • ⚠️ Analog input misconfiguration or signal loss
  • ⚠️ Drive not starting post power loss or trip reset
  • ⚠️ Low-speed overcurrent due to incorrect boost settings
  • ⚠️ Heatsink fan fault or cooling path blockage
  • ⚠️ False phase loss detection with load imbalance
  • ⚠️ Ground loop-induced feedback noise
  • ⚠️ Feedback fault with custom encoder integration
  • ⚠️ Configuration lockout with certain firmware revisions
  • ⚠️ No response from VFD after input relay activation
  • ⚠️ Brake resistor warning (if later retrofit installed)

Flexa Systems — Reliable Repair & Supply

Flexa Systems repairs and stocks Parker 690+ series drives like the 690+0060/230/CNN. Whether you’re dealing with hardware faults or configuration issues, we provide tested repairs and fast shipping across the U.S. from our Texas-based facility.

📌 Important Notes
This model has no braking switch or system board. Flexa Systems offers both repair and replacement for this unit.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32082 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping