Parker 690+0060/460/1NN | Repair & Stock
Parker 690+0060/460/1NN | Repair & Stock
Parker 690+0060/460/1NN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0060/460/1NN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0060/460/1NN | 60 HP 460V AC690+ Drive No Brake

The Parker 690+0060/460/1NN is a powerful 60 HP VFD designed to operate on 460V 3-phase systems. This version ships without a braking switch and system board, streamlining it for setups where external components handle braking and control logic independently.

  • Model Series: AC690+
  • Power Output: 60 HP
  • Operating Voltage: 460V (±10%)
  • Frame Size: E
  • Enclosure: NEMA 1 (UL Type 1)
  • Brake Configuration: Not included
  • Control Board: Not installed

Faults Commonly Repaired on This Model:

  • ⚠️ Overvoltage faults from braking chopper misconfigurations
  • ⚠️ Ground fault alarms from insulation wear or cable issues
  • ⚠️ Control section power failures (blown auxiliary PSU)
  • ⚠️ Trip codes caused by EMI or noisy inputs
  • ⚠️ Firmware hangs after incorrect parameter load
  • ⚠️ External fault triggering from mismatched signal wiring
  • ⚠️ Drive not running despite proper input – logic fault
  • ⚠️ Parameter locking due to EEPROM corruption
  • ⚠️ Heatsink thermal cutouts from blocked ventilation
  • ⚠️ Sudden restarts under load due to unstable DC bus
  • ⚠️ Current imbalance across phases during acceleration
  • ⚠️ Auto-tune failures or motor misidentification
  • ⚠️ Zero-speed threshold errors in PID control
  • ⚠️ I/O board failures affecting analog inputs
  • ⚠️ Fault history retention issues
  • ⚠️ Speed command loss from potentiometer failure
  • ⚠️ Spurious trips during network communication
  • ⚠️ Overcurrent on low speed start
  • ⚠️ Internal relay sticking or contact welding
  • ⚠️ Contactor bounce detection issues
  • ⚠️ Sudden reset lock-up after fault recovery

Why Flexa Systems?

We know the 690+ series inside out. At Flexa Systems, we restore failed Parker drives to full function — including those like the 690+0060/460/1NN without braking or internal control. Our warehouse stocks these units, and our Texas-based lab rigorously tests each repair before it leaves. Fast turnaround. Nationwide coverage.

📌 Important Notes
No brake or system board installed. Flexa Systems repairs and keeps this model in stock — reach out to confirm exact configuration before ordering.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32086 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping