Parker 690+0060/230/CBN | Repair & Stock
Parker 690+0060/230/CBN | Repair & Stock
Parker 690+0060/230/CBN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0060/230/CBN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0060/230/CBN | 60 HP 230V AC690+ VFD

The Parker 690+0060/230/CBN is a powerful 60 HP variable frequency drive built for 230V applications. It comes in a chassis-style IP20 enclosure with an integrated braking switch, and no system board installed. This drive is a solid match for setups that require braking support but utilize external control logic.

  • Series: AC690+
  • Output Power: 60 HP
  • Input Voltage: 230V (±10%), 50/60Hz
  • Frame Size: E
  • Enclosure: Chassis (IP20)
  • Braking Option: Brake switch installed
  • System Board: Not installed

Common Faults We Can Repair:

  • ⚠️ Brake switch trips under repeated deceleration loads
  • ⚠️ Desaturation (DESAT) faults tied to damaged IGBTs
  • ⚠️ Phase loss or undervoltage during startup
  • ⚠️ Stall errors from high inertia loads
  • ⚠️ Analog input errors from incorrect signal scaling
  • ⚠️ Internal fan or thermal fault on the heatsink
  • ⚠️ Ripple voltage instability in the DC link
  • ⚠️ Overspeed trips due to missing or misconfigured encoder
  • ⚠️ Short circuit or ground fault in motor cabling
  • ⚠️ Fault Code N if system board is later retrofitted improperly
  • ⚠️ EEPROM fault from bad parameter write or power loss
  • ⚠️ 24V output shorted in external I/O
  • ⚠️ Boost misconfiguration triggering low-speed overcurrent
  • ⚠️ Brake resistor not properly sized or open circuit
  • ⚠️ Current limit shutdowns under sudden torque demand
  • ⚠️ Startup failure due to configuration corruption
  • ⚠️ Inconsistent drive resets after trip clear
  • ⚠️ Heatsink fan stalled or airflow path blocked
  • ⚠️ Encoder signal noise causing unstable speed feedback
  • ⚠️ Watchdog timeout from timing issues (if control board retrofitted)
  • ⚠️ System won’t reset due to parameter protection settings

Service You Can Count On — Flexa Systems

We handle full repairs and can supply tested units like the Parker 690+0060/230/CBN. Whether it’s drive diagnostics, brake circuit faults, or encoder feedback issues — our team has the expertise to get your system back online. Based in Texas, delivering nationwide.

📌 Important Notes
Brake switch included, no system board installed. Flexa Systems repairs and sells this AC690+ VFD model with fast U.S. support.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32080 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping