Parker 690+0015/460/CBS | Repair & Stock
Parker 690+0015/460/CBS | Repair & Stock
Parker 690+0015/460/CBS | Repair & Stock
Parker 690+0015/460/CBS | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0015/460/CBS | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Texas-Based Shop & Warehouse
Serving All 50 States with Fast Turnaround 🇺🇸

Parker 690+0015/460/CBS | 15 HP / 11 kW VFD – 460V, IP20, With Brake Switch & System Board

In-Stock or Repaired Fast – Get Back to Production

The Parker 690+0015/460/CBS is a 460V variable frequency drive delivering 11 kW (15 HP). It comes with a **brake switch** and a **system board**, ideal for regenerative or high-inertia loads. Flexa Systems offers both stocked replacements and fast turnaround repairs.

Drive Specifications

  • Power Output: 11 kW / 15 HP
  • Voltage Rating: 460V (3-phase)
  • Enclosure: Chassis/IP20
  • Brake Switch: Integrated
  • System Board: Installed
  • Model: Parker 690+0015/460/CBS

21 Faults We Fix Regularly – Reworded, Not Repeated

These are the most frequently encountered VFD failures we handle in our repair facility – each rephrased to keep your product page fresh for SEO:

  • Phase Loss: Missing phase due to incoming power issues or cable damage.
  • Excessive Bus Voltage: Caused by fast deceleration or incorrect braking setup.
  • Input Sag: Voltage drop at power-up or under load causing resets.
  • IGBT Drive Error: One or more output transistors exceeded limit or failed.
  • Overtemperature: Internal heat buildup or clogged ventilation triggering thermal alarm.
  • Encoder Not Detected: Speed feedback signal interrupted or misconfigured.
  • Brake Error: Fault in resistor or brake transistor logic (this model supports brake switch).
  • Current Spike: Load demand exceeds limit momentarily, or short circuit on output side.
  • Emergency Stop: Safety input triggered or wired incorrectly to STO logic.
  • Signal Loss: Analog input drops or fluctuates, commonly on worn-out 10V/24V supplies.
  • Comms Failure: Loss of Modbus/Profibus/Devicenet link to external controller.
  • Gate Control Fault: Drive cannot properly switch output stage due to logic board issue.
  • Overspeed: Feedback or tuning issue causes motor to exceed configured speed.
  • Power-Up Lock: Incomplete boot sequence from EEPROM or corrupted firmware.
  • Ripple Current Issue: Indicates capacitor degradation or DC bus instability.
  • Temp Probe Fault: Incorrect or no reading from heatsink sensor path.
  • Short on Motor Side: Drive detects a direct short between output legs or to ground.
  • Control Logic Crash: Internal processor or parameter corruption during runtime.
  • Weak Auxiliary Output: 10V/24V line underperforms under minor external load.
  • Motor Overheat Protection: Triggers when motor’s thermal threshold is crossed.
  • High Inertia Trip: Restart fails or faults out on applications with heavy load inertia.

Trust Flexa Systems for Component-Level Accuracy

We go beyond board swaps. Each 690+ repair is done by trained technicians who understand Parker architecture and have access to proper load-testing equipment.

Important Notes

Let us know if you need help validating the brake resistor sizing, keypad compatibility, or firmware revision.

We **supply and service Parker 690+ units**, with most parts and boards in-stock for fast repair or fulfillment.

Note: Specs decoded from official Parker PN documents. If your label shows minor variation, contact us to cross-match.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32027 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping