Parker 690+0015/230/1NN | Repair & Stock
Parker 690+0015/230/1NN | Repair & Stock
Parker 690+0015/230/1NN | Repair & Stock
Parker 690+0015/230/1NN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0015/230/1NN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Texas-Based Shop & Warehouse
Serving All 50 States with Fast Turnaround 🇺🇸

Parker 690+0015/230/1NN | 11 kW / 15 HP VFD – Clean Build, High Compatibility

Repair or Supply — Flexa’s Got You

The Parker 690+0015/230/1NN is a 15 HP drive tailored for 230V three-phase power setups. With no brake switch and no system board installed, it’s a lean, dependable model often used in streamlined automation systems. Flexa Systems supports full repair and replacement services for this unit — nationwide.

Technical Summary

  • Rated Power: 11 kW / 15 HP
  • Voltage: 230V (3-phase)
  • Enclosure: NEMA 1
  • Brake Circuit: Not installed
  • System Board: Not installed
  • Drive Code: Parker 690+0015/230/1NN

What We Repair On This Model

This VFD can experience issues from wear, environment, or poor tuning. We commonly resolve:

  • DC Overvoltage Fault: Power surges from poor deceleration config or regen energy buildup.
  • Undervoltage Error: Caused by phase loss, supply sag, or internal converter failure.
  • Overcurrent Trip: Typically from motor jams, locked rotors, or faulty load connections.
  • Overtemperature Trip: Heatsink or enclosure exceeds safe limits — often due to airflow restriction.
  • Motor Stall Fault: Detected when the motor fails to rotate properly under expected load.
  • Communication Timeout: Lost connection with controller, HMI, or remote panel.
  • Safe Torque Off Error: STO signal issue from control wiring or internal fault — common and repairable.
  • Internal Comm Code N: Internal data error between logic and gate circuitry.
  • Speed Feedback Alarm: Encoder misread or signal instability leads to feedback failure.
  • Current Limit Fault: Exceeded amp draw due to improper torque curve or load resistance.
  • Aux 24V Rail Fault: Shorted or overloaded external IO circuit draws down 24V source.
  • Phase Loss Detected: Missing input phase caused by wiring, upstream faults, or internal rectifier damage.
  • Desaturation Trip: High-speed IGBT protection kicks in during extreme load or short.
  • Ripple Voltage Fault: DC bus fluctuation beyond tolerance — often capacitor or filter issue.
  • Overspeed Trip: Motor speed exceeds configured maximum — usually encoder or loop tuning problem.
  • Analog Signal Error: Signal out of range or missing from 4–20mA or voltage input devices.
  • Low-Speed Overload: High current at zero speed — often from overboost, load bind, or motor problem.
  • Thermal Trip – Motor: Detected via thermistor — caused by overload or failed temp monitoring.

Why Choose Flexa Systems?

We specialize in Parker 690+ drive support — both for field replacements and in-depth board-level repairs. From STO board issues to power supply faults, we know this series inside out.

Important Notes

Let us help confirm frame fit, options, or repair feasibility. We’re your technical resource for all Parker drives.

Flexa Systems offers **repair and replacement services for 690+ units** — backed by real diagnostic testing and expert care.

Note: Configuration may vary. If you’re unsure about compatibility, we’ll help you get the right fit.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32019 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping