Parker 690+0015/230/1BS | Repair & Stock
Parker 690+0015/230/1BS | Repair & Stock
Parker 690+0015/230/1BS | Repair & Stock
Parker 690+0015/230/1BS | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0015/230/1BS | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Shipping from Texas Warehouse
 Serving All 50 States | Based in Texas | Units In-Stock & Ready for Fast Turnaround

Parker 690+0015/230/1BS | 15 HP (11 kW) 230V VFD

  • Series: 690+ AC Variable Frequency Drive
  • Power Output: 15 HP (11 kW)
  • Voltage Input: 230V ±10%, 50/60Hz
  • Enclosure: NEMA 1 (UL Type 1 – standard indoor)
  • Brake Configuration: Integrated brake power switch (external resistor required)
  • System Board: Fitted

Frequent Failures We Repair 🔧

  • ⚡ Overvoltage issues caused by large inertia loads, misconfigured regen settings, or open braking circuits
  • 🔋 Undervoltage during brownouts, phase imbalance, or internal power supply failure
  • 🚨 Overcurrent triggered by excessive torque demand, shorted motor cables, or shock loads
  • 🌡️ Heatsink overheating due to blocked cooling paths or high ambient temperatures
  • 🛑 Motor stall alarms under excessive mechanical loads or improperly set stall trip times
  • 🔥 Brake resistor overload during repeated deceleration cycles without cooldown
  • 💥 Brake switch burnout caused by aggressive stop routines or undersized braking paths
  • 📡 COMMS timeouts from poor cable routing, electromagnetic interference, or short time settings
  • 🛑 STO board failure — we can fix these internal safety board errors fast
  • 🔄 Faulty controller-to-power board communication often caused by internal damage or firmware errors
  • 🎯 Speed feedback faults from damaged encoders or misconfigured feedback loops
  • ⚠️ Current limit exceeded under sudden torque changes or unbuffered starts
  • 🔌 24V power drop caused by short-circuited external control hardware
  • 🔻 Phase loss detection errors — internal board issues or external fuse failure
  • 💣 DESAT (instant overcurrent) from faulty switching modules or blown IGBTs
  • 🔁 VDC ripple excess — bad capacitor bank or unbalanced supply input
  • 🧨 Short circuits in braking circuit or current surge in external resistors
  • 🚀 Overspeed triggered by faulty speed feedback or parameter mismatches
  • 📏 Analog input faults from sensor wiring shorts or incorrect signal configuration
  • 🐢 Overcurrent at low speed — typically fixed boost set too high or improper torque tuning
  • 🌡️ Motor overheating from cooling failure, thermistor disconnection, or improper motor match

Flexa Systems Delivers Repairs You Can Trust

Flexa Systems repairs and stocks Parker 690+0015/230/1BS drives for businesses across the U.S. Whether it’s tripping at startup, failing under load, or misfiring on braking — we’ll diagnose and restore your drive fast. Our shop is based in Texas, proudly shipping and servicing nationwide.

📌 Important Notes

Please contact us to confirm your exact requirements or verify application compatibility.

Note: Pricing and availability vary depending on unit condition, configuration, and current stock levels.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32018 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping