Parker 690+0040/230/CNN | Repair & Stock
Parker 690+0040/230/CNN | Repair & Stock
Parker 690+0040/230/CNN | Repair & Stock
Parker 690+0040/230/CNN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0040/230/CNN | Repair & Stock

Brand new, original packaging:
$ 7900
In stock: 10
Refurbished price:
$ 4950
In stock: 1
Repair Price Standard:
$ ~3770
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0040/230/CNN | 40 HP 230V AC690+ VFD

The Parker 690+0040/230/CNN is a 40 HP, 230V variable frequency drive built for performance in demanding automation environments. With a streamlined chassis build, no braking hardware, and no system board, this model is suited for externally managed control systems where simplicity and high power output are key.

  • Drive Series: AC690+
  • Horsepower: 40 HP
  • Voltage: 230V ±10%, 50/60Hz
  • Frame: D
  • Enclosure: Chassis (IP20)
  • Braking Switch: Not installed
  • System Board: Not included

Common Failures We Regularly Fix:

  • ⚠️ Overvoltage trips on deceleration or unstable input
  • ⚠️ Undervoltage from weak supply or phase loss
  • ⚠️ Stall conditions during heavy startup loads
  • ⚠️ Overcurrent due to improper torque settings
  • ⚠️ Ripple voltage alarms from bad rectifiers
  • ⚠️ Short circuits in motor or output cables
  • ⚠️ Communication faults — board sync or timeout issues
  • ⚠️ Analog input faults (sensor wiring issues or config)
  • ⚠️ Heatsink thermal faults from poor ventilation
  • ⚠️ Motor overheating with missing or broken thermistors
  • ⚠️ Speed feedback errors during acceleration
  • ⚠️ Low-speed overcurrent from boost misadjustment
  • ⚠️ Fault code N – internal comm bus error
  • ⚠️ Input phase failure – blown fuses or terminal issues
  • ⚠️ Encoder signal loss causing overspeed shutoff
  • ⚠️ 24V output failure on external I/O board
  • ⚠️ Incorrect stall trip settings
  • ⚠️ No startup due to failed power-up sequence
  • ⚠️ Internal noise causing analog signal jitter
  • ⚠️ Ground loop-induced errors on feedback lines
  • ⚠️ Desaturation (DESAT) errors in power devices

Flexa Systems — Industrial VFD Experts

Whether your drive is shutting down unexpectedly or won’t power up at all, Flexa Systems offers full repair and replacement support for Parker 690+ drives. We test, troubleshoot, and restore these units to OEM-level performance. Based in Texas — serving all 50 states.

📌 Important Notes
Always confirm drive compatibility and configuration before ordering or sending for service.
Flexa Systems both repairs and supplies Parker AC690+ drives like this one.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32060 Categories: , Brand: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping