Parker 690+0020C/460/CBN/007 | Repair & Stock
Parker 690+0020C/460/CBN/007 | Repair & Stock
Parker 690+0020C/460/CBN/007 | Repair & Stock
Parker 690+0020C/460/CBN/007 | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0020C/460/CBN/007 | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Texas-Based Shop & Warehouse
Serving All 50 States with Fast Turnaround 🇺🇸

Parker 690+0020C/460/CBN/007 | 20 HP / 15 kW VFD – 460V, IP20, Filtered with Control Board Variant

High-Precision Drive with Intelligent Control — In Stock and Repairable

The Parker 690+0020C/460/CBN/007 is a feature-rich AC VFD engineered for industrial speed control. Operating at 460V, this 15 kW (20 HP) model includes EMC filtering and a specific configuration suited for enhanced control (CBN series, /007 variant).

Technical Overview

  • Output Power: 15 kW / 20 HP
  • Voltage Rating: 460V (Three-phase)
  • Enclosure: IP20 Chassis Mount
  • Filter Option: “C” Filter Included
  • Variant: CBN Series with Configuration /007

Frequent Faults We Repair On This Model

Our repair center sees this exact model often — here are common failures we troubleshoot and resolve:

  • Missing Input Phase: One or more incoming power phases not detected.
  • DC Bus Overvoltage: Voltage spike during braking or backfeeding.
  • Low Voltage Trip: Sagging input under load conditions.
  • IGBT Module Failure: Gate control or power short circuit faults.
  • Overtemperature Error: Heat buildup due to fan failure or ventilation blockages.
  • Encoder Faults: Speed feedback circuit interruption or drift.
  • Braking Issues: Incorrect resistance value or thermal damage in brake circuit.
  • Overcurrent Trip: Peak current draw exceeding drive’s safety limit.
  • Safety Loop Interrupt: Emergency stop wiring fault or chain break.
  • Input Signal Fault: Command voltage or current out of range.
  • Serial Comm Loss: Link failure on Profibus, CANopen, or other protocol.
  • Gate Driver Alarm: Internal gate pulse logic error or isolation failure.
  • Overspeed Cutoff: Load exceeds configured RPM ceiling.
  • Boot Failure: Drive doesn’t initialize due to EEPROM or logic fault.
  • DC Link Ripple High: Aging capacitor bank creating instability.
  • Thermal Sensor Fault: Incorrect reading or open thermistor.
  • Ground Leakage Trip: Fault detected between output and ground.
  • Control Hang: Processor freeze, typically from voltage noise or spike.
  • Aux Voltage Instability: 10V or 24V reference output not stable.
  • Motor Thermal Alarm: High PTC/PT100 resistance due to heating.
  • Failed Ramp Profile: Drive unable to meet ramp up/down profile safely.

Why Choose Flexa Systems?

We don’t just replace boards — we analyze, troubleshoot, and restore functionality at the component level. Every Parker 690+ model gets live testing under load before leaving our shop.

Important Notes

This unit is eligible for both **fast repair services and replacement sales**. Make sure to include your full configuration string when requesting service — /CBN/007 variants may require special handling.

Note: Pricing depends on unit condition, build spec, and availability. Drop us a line for a same-day quote!

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32035 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping