📦 Shipping from Texas Warehouse
Serving All 50 States | Based in Texas | Units In-Stock & Ready for Fast Turnaround
Parker 690+0001/460/CBN | 1 HP (0.75 kW) 460V VFD
- Series: 690+ AC Drive
- Power Output: 1 HP (0.75 kW)
- Input Voltage: 460V (Range: 380–460V ±10%)
- Enclosure: Chassis (IP20) — ideal for integration inside enclosures
- Brake Configuration: Brake power switch included (external resistor not included)
- System Board: Not included
Repairs We Perform on This Model 🔧
- ⚡ High voltage trips due to overloaded motors, config errors, or open brake resistors
- 🔋 Low voltage trips from missing phases, poor input power, or internal board faults
- 🚨 Excessive motor current draw during startup or braking — possibly due to shorts or shock loading
- 🌡️ Overheat shutdowns from blocked airflow, high ambient temps, or fan failures
- ⛔ Stalled motors due to boost settings or incorrect load configurations
- 🔥 Dynamic brake resistor overloads from rapid or repetitive deceleration
- 🧨 Faulty brake switch components under stress from high-inertia stops
- 🔗 Loss of communication with external controllers — usually misconfigured timeout or wiring
- 🛡️ STO board errors — often related to damaged circuitry or improper board seating
- 📉 Speed feedback drift or mismatch leading to instability in closed-loop control
- ⚠️ Overcurrent faults from aggressive acceleration profiles or shorted wiring
- 🧃 24V output low — traced back to shorts or excessive load on the customer terminals
- 💡 Phase detection faults — either a genuine phase loss or internal trace issue
- 🔥 DESAT error — an overcurrent protection trip usually tied to IGBT damage
- 🔄 High ripple on the DC bus due to missing phases or faulty capacitors
- 💥 Brake resistor circuit faults caused by overcurrent events
- 🚀 Overspeed alerts — often caused by encoder miscalibration or mechanical instability
- 📟 Analog signal range errors or misconfigurations on 4-20mA input
- 🐌 Drive pulling too much current at low frequency — often due to overboosting
- 🔥 Motor thermal protection tripped due to sustained low-speed operation or thermistor break
- 🔄 Controller comms faults from firmware instability or damaged control cards
Why Flexa Systems is the Right Choice
At Flexa Systems, we bring Parker 690+ drives like the 690+0001/460/CBN back to life with expert testing and component-level repair. Whether it’s a feedback issue, braking problem, or total startup failure — we’ve got you covered. Located in Texas, we support clients across all 50 states with fast shipping and dependable turnaround.
📌 Important Notes
Please contact us to confirm your exact requirements or verify application compatibility.
Note: Pricing and availability vary depending on unit condition, configuration, and current stock levels.
Representative photo only, the
picture does not illustrate the actual unit and is provided for reference
purposes only
