Parker 690+0001/460/1BN | Repair & Stock
Parker 690+0001/460/1BN | Repair & Stock
Parker 690+0001/460/1BN | Repair & Stock
Parker 690+0001/460/1BN | Repair & Stock
Parker 690+0001/460/1BN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0001/460/1BN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Shipping from Texas Warehouse
 Serving All 50 States | Based in Texas | Units In-Stock & Ready for Fast Turnaround

Parker 690+0001/460/1BN | 1 HP (0.75 kW) 460V VFD

  • Series: 690+ AC Drive
  • Power Rating: 1 HP (0.75 kW)
  • Input Voltage: 460V (380–460V ±10%, 50/60Hz)
  • Enclosure Type: NEMA 1 (UL Type 1 – indoor rated)
  • Braking Configuration: Brake power switch included (external resistor required)
  • System Board: Not fitted

Most Frequent Issues We Service ⚠️

  • 🔋 Overvoltage due to excessive load, high supply, or broken brake circuit
  • 🔌 Undervoltage triggered by phase loss, low line voltage, or internal failure
  • 🔄 Overcurrent caused by sudden load changes, shorts, or incorrect motor settings
  • 🌬️ Heatsink overheating from blocked ventilation or environmental constraints
  • 🚫 Motor stalling due to improper current limit, low stall settings, or high boost
  • 🔥 Brake resistor overload from rapid deceleration of heavy machinery
  • 💣 Brake switch overstressed due to repetitive braking under load
  • 📡 Communication timeouts linked to configuration or cable/board issues
  • 🧯 STO board malfunctions — we see and fix these often
  • 🔁 Control board communication errors — usually firmware or circuit-related
  • 📉 Speed feedback faults after prolonged deviations
  • 🚨 Current limit tripping on large acceleration or torque shock
  • ⚡ 24V supply failure from shorts or excessive draw on control lines
  • 🔻 Phase loss — blown fuses, loose terminals, or internal drive damage
  • ⚠️ DESAT trips due to internal switching faults — often IGBT related
  • 🔄 Ripple voltage warnings from DC bus instability or input phase issues
  • 🚫 Brake overcurrent faults from miswiring or hardware failure
  • 🚀 Overspeed from encoder failures or configuration problems
  • 📈 Analog input errors: shorted or misconfigured 4-20mA signals
  • 💥 Excessive current at low frequency — typically boost setting too high
  • 🌡️ Motor overheating from poor ventilation or thermistor issues

Flexa Systems: Your Trusted Parker VFD Partner

We repair and stock the Parker 690+0001/460/1BN drive with expert diagnostics and fast service. Whether your drive is throwing faults, stalling motors, or facing power issues, Flexa Systems gets you back online quickly. Our Texas-based warehouse serves the entire U.S. — no delays, no surprises.

📌 Important Notes

Please contact us to confirm your exact requirements or verify application compatibility.

Note: Pricing and availability vary depending on unit condition, configuration, and current stock levels.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32005 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping