📦 Shipping from Texas Warehouse
Serving All 50 States | Based in Texas | Units In-Stock & Ready for Fast Turnaround
Parker 690+0010/460/1BN | 10 HP (7.5 kW) 460V VFD
- Series: 690+ AC Drive
- Power Output: 10 HP (7.5 kW)
- Input Voltage: 460V (Accepts 380–460V ±10%)
- Enclosure Type: NEMA 1 (Indoor-rated, UL Type 1)
- Braking Feature: Brake switch included, external resistor required
- System Board: Not included
Repairable Issues Common on This Drive 🔧
- ⚡ DC link overvoltage due to regen energy buildup, high input, or missing brake resistor
- 🔋 DC undervoltage during power dips, phase loss, or internal PSU failure
- 🚨 Motor overcurrent events caused by shock loading or wrong torque/ramp settings
- 🌡️ Heatsink thermal trips — often from blocked vents or control cabinet overheating
- 🐢 Motor stall trips from load inertia, poor torque config, or low current limits
- 🔥 Overloaded braking resistor in heavy decel applications without proper delay
- 🧨 Brake switch overload under frequent stops or long decel profiles
- 📡 Communication dropout due to bad cable routing or COMMS config
- 🛑 STO error tied to safe torque off module failure or board damage
- 🔄 Internal COMMS failure between controller and IGBT modules
- 🎯 Encoder or feedback mismatch, causing speed regulation faults
- ⚠️ Current spikes tripping the drive when exceeding set threshold
- 🔌 24V output supply drop triggered by shorts in the customer interface
- ⚠️ Input phase fail warning — may be due to wiring, fusing, or internal trace issues
- 💥 DESAT protection triggering from IGBT or power transistor faults
- 🔁 High VDC ripple warnings from unbalanced input or weak bus caps
- 💣 Brake circuit overcurrent fault, indicating bad wiring or resistor failure
- 🚀 Overspeed alarms due to faulty encoder or unstable feedback loop
- 📏 Analog input configuration error or signal drift
- 🐌 Excess current at low frequency, typically from fixed boost misconfiguration
- 🌡️ Motor overtemp detection caused by failed thermistor or poor ventilation
Flexa Systems — Parker Drive Specialists
We stock and service the Parker 690+0010/460/1BN for clients nationwide. Whether your VFD is locking up, tripping with faults, or not powering up at all — we can help. Flexa Systems offers fast, dependable service from our Texas facility, with nationwide support and quick turnaround.
📌 Important Notes
Please contact us to confirm your exact requirements or verify application compatibility.
Note: Pricing and availability vary depending on unit condition, configuration, and current stock levels.
Representative photo only, the
picture does not illustrate the actual unit and is provided for reference
purposes only
