Parker 690+0010/230/1BN | Repair & Stock
Parker 690+0010/230/1BN | Repair & Stock
Parker 690+0010/230/1BN | Repair & Stock
Parker 690+0010/230/1BN | Repair & Stock
Parker 690+0010/230/1BN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0010/230/1BN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Shipping from Texas Warehouse
 Serving All 50 States | Based in Texas | Units In-Stock & Ready for Fast Turnaround

Parker 690+0010/230/1BN | 10 HP (7.5 kW) 230V VFD

  • Series: Parker 690+ Variable Frequency Drive
  • Power Output: 10 HP (7.5 kW)
  • Input Voltage: 230V ±10%, 50/60Hz
  • Enclosure: NEMA 1 (UL Type 1) indoor standard
  • Braking Configuration: Includes braking switch (external resistor required)
  • System Board: Not included

Frequent Issues We Can Service ⚠️

  • 🔺 Overvoltage: Common with regenerative loads, poor brake setup, or config errors
  • 🔻 Undervoltage: Often caused by phase loss, poor mains power, or PCB faults
  • ⛔ Overcurrent trips during startup or decel due to misconfigured boosts or faulty wiring
  • 🌬️ Heatsink over-temp from insufficient spacing or ambient heat buildup
  • 🚫 Motor stalls under load or low current limit configurations
  • 🔥 Brake resistor overload from high-inertia decel or repeated stopping
  • 🧨 Brake switch fails from excessive current or switching stress
  • 📉 Communication loss from parameter mismatch or hardware failure
  • 🛑 STO (Safe Torque Off) faults — frequently resolved by STO board replacement
  • 📡 Internal card communication errors due to firmware glitches or damaged backplane
  • 🎯 Speed feedback error — typically an encoder fault or wiring problem
  • 🚨 Current limit tripping when drive is pushed past set thresholds
  • 🔌 24V auxiliary power failures due to shorts or excessive loads
  • ⚠️ Input phase loss from bad fuses or internal trace issues
  • 💣 DESAT (overcurrent protection) from IGBT or power section failure
  • 🔄 VDC ripple — often a sign of bad capacitors or supply phase imbalance
  • 🛠️ Brake circuit shorted — a misconfigured or physically damaged brake path
  • 🚀 Overspeed — feedback loop error or mechanical feedback source failing
  • 🎚️ Analog input fault — caused by mismatched ranges or overvoltage inputs
  • 🐌 Low-speed overcurrent — commonly from aggressive boost or failing motors
  • 🌡️ Motor overtemperature from thermistor issues or improper cooling

Flexa Systems: Trusted Experts in Parker VFDs

At Flexa Systems, we provide both expert repair and in-stock solutions for the Parker 690+0010/230/1BN VFD. Whether you’re seeing overcurrent trips, STO errors, or speed feedback faults, we’re ready to diagnose and resolve it. Based in Texas and proudly serving all 50 states with quick turnaround and support.

📌 Important Notes

Please contact us to confirm your exact requirements or verify application compatibility.

Note: Pricing and availability vary depending on unit condition, configuration, and current stock levels.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32012 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping