📦 Texas-Based Shop & Warehouse
Serving All 50 States with Fast Turnaround 🇺🇸
PRI / Equipe / Brooks — PRE‑200B Pre‑Aligner Component‑Level Repair
PRE‑200B pre‑aligner (also known under PRI, Equipe, or Brooks).
If your PRE‑200B pre‑aligner (PRI / Equipe / Brooks) won’t power up, fails to home, or moves the wafer incorrectly, Flexa Systems can repair the unit at the component level. We focus on the PRE‑200B specifically—diagnosing its power, control, and motion subsystems, replacing failed parts on the boards and assemblies, and returning the pre‑aligner fully tested.
Common PRE‑200B Faults We Repair
- No power‑up (dead unit, PSU or internal protection trips)
- No axis movement (axes won’t enable or won’t home)
- Errors during axis movement (homing/index errors, following error, overcurrent)
- Wrong axis movement (mis‑indexing, reversed direction, drift)
- Intermittent or thermal faults that appear after warm‑up
What We Repair on the PRE‑200B
Component‑level work on the PRE‑200B’s electronics and motion hardware, including: control boards and logic cards, motor drivers/amplifiers, power supplies and DC‑DC converters, harnesses/connectors/relays, home/limit sensors, and feedback devices. Mechanical inspections of the motion path (motors, gear/harmonic assemblies, couplings) are included where appropriate. If a specific module on your PRI / Equipe / Brooks PRE‑200B is not recoverable, we can source a replacement when available.
Our Process for PRE‑200B Repair
- Failure analysis on the PRE‑200B: intake checks, fault replication, power and signal diagnostics.
- Component‑level repair: replace failed semiconductors, regulators, drivers, passives; rework solder joints; restore connectors and wiring.
- Motion verification: enable axes, verify homing/index routines and I/O where possible.
- Functional test: burn‑in and thermal checks before shipment.
- Report & warranty: clear findings and recommendations included.
Important Notes
- Specifications can vary by revision; verify against the official manual for your hardware.
- Replacement part availability may affect turnaround—ask about rush repair options.
How to Start Your PRE‑200B Repair
- Email a photo of the PRE‑200B nameplate and a short symptom list.
- We reply with triage steps and a formal estimate.
- Ship the PRE‑200B to our Texas shop with the provided reference number.
Talk to a PRE‑200B Specialist
PRI / Equipe / Brooks PRE‑200B pre‑aligner repairs, nationwide service.
Contact Flexa Systems
