PowerFlex 700 20BD040A0AYNADB0 | Repair or Stock Options
PowerFlex 700 20BD040A0AYNADB0 | Repair or Stock Options
PowerFlex 700 20BD040A0AYNADB0 | Repair or Stock Options
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

PowerFlex 700 20BD040A0AYNADB0 | Repair or Stock Options

Brand new, original packaging:
$ 0.99
In stock: 1
Refurbished price:
$ TBD
In stock: 1
Repair Price Standard:
$ TBD
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
Fast Turnaround & Testing
Phone support by engineers

Allen-Bradley PowerFlex 700 20BD040A0AYNADB0 | 30 kW / 40 A VFD

Repair Turnaround or Exchange — Your Choice

If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BD040A0AYNADB0 in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.

Key Specifications

  • Input Voltage: 480V AC
  • Current (Amps): 40
  • Power Rating: 30 kW / 40 HP
  • Frame: 3
  • Enclosure: IP20, NEMA/UL Type 1
  • HMI Presence: Blank Cover
  • Documentation: Manual
  • Brake: Yes
  • Internal Braking Resistor: No
  • Emission: CE Filter: Yes, CM Choke: Yes
  • Comm Slot: DeviceNet
  • Control & I/O: Standard | 115V AC
  • Feedback: None

Most Common Faults We Can Solve

These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.

  • Ground Fault: >25% rating current to earth ground detected.
    Fix: Meg-check motor and cable for ground; we isolate insulation faults and re-terminate.
  • Output Phase Loss: Current lost in one/more output phases.
    Fix: Check motor/drive wiring; we test phase continuity and repair output stage/wiring faults.
  • Cntl Bd Overtemp: Main Control Board over-temperature.
    Fix: Check board fan and ambient; we replace fans and re-flow/replace the MCB if required.
  • Phase UV/VW/UW Short: Excessive current between output terminals.
    Fix: Check for shorted motor/wiring; we repair/replace damaged output stage.
  • SW OverCurrent: 1 ms current exceeded its rating (above cont., below HW limit).
    Fix: Reduce load/boost/brake volts; we capture waveforms and reset to safe values.
  • UnderVoltage: DC bus dropped below the minimum threshold.
    Fix: Check incoming AC for sags/interruption; we test input and DC bus health and stabilize with line conditioning if needed.
  • Encoder Quad Err: Both channels changed in one clock (noise or fault).
    Fix: Reduce noise/replace encoder; we tidy shielding/grounds and retest.

Important Notes

Pricing listed on the website is for reference only and is subject to change over time.

Unsure about the exact model? Share a photo or full catalog code. Flexa Systems will confirm compatibility fast.

We service and stock Allen-Bradley PowerFlex 700 VFDs—component-level repairs or ready-to-ship replacements.

  • Load testing is performed on all units prior to shipment.
  • Lead times and pricing depend on condition and options.
  • Expedited exchange programs available.
  • 12–24 month coverage on repairs and remans (where applicable).

Repair & Sales • PowerFlex Specialists

Component-level repairs, reman units, and ready-to-ship replacements when available.

Check Availability

Send your requirement — we’ll match repair or stock options.
Manufacturer

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
Cart Close
Updating…
  • No products in the cart.

Continue shopping