Fast Turnaround & Testing
Phone support by engineers
Allen-Bradley PowerFlex 700 20BB2P2A0NYNBNC0 | 0.5 kW / 2.2 A VFD
Repair Service or Certified Refurb — You Pick
If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BB2P2A0NYNBNC0 in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.
Key Specifications
- Input Voltage: 240V AC
- Current (Amps): 2.2
- Power Rating: 0.5 kW / 1 HP
- Frame: 0
- Enclosure: IP20, NEMA/UL Type 1
- HMI Presence: Blank Cover
- Documentation: No Manual
- Brake: Yes
- Internal Braking Resistor: No
- Emission: CE Filter: Yes, CM Choke: No
- Comm Slot: None
- Control & I/O: Vector | 24V DC
- Feedback: None
Most Common Faults We Can Solve
These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.
- Encoder Quad Err: Both channels changed in one clock (noise or fault).
Fix: Reduce noise/replace encoder; we tidy shielding/grounds and retest.
- UnderVoltage: DC bus dropped below the minimum threshold.
Fix: Check incoming AC for sags/interruption; we test input and DC bus health and stabilize with line conditioning if needed.
- Decel Inhibit: Bus regulation halts decel to limit DC bus.
Fix: Verify line & grounding, add DB resistor or lengthen decel; we configure/supply DB.
- Phase U/V/W to Ground: Phase-to-ground fault detected on the output.
Fix: Check motor cable/motor for grounds; replace drive if damage found.
- SW OverCurrent: 1 ms current exceeded its rating (above cont., below HW limit).
Fix: Reduce load/boost/brake volts; we capture waveforms and reset to safe values.
- OverVoltage: DC bus voltage exceeded the maximum value.
Fix: Verify line transients; extend decel time or add a dynamic brake option; we can size/install a DB kit and soak-test the drive.
- Output Phase Loss: Current lost in one/more output phases.
Fix: Check motor/drive wiring; we test phase continuity and repair output stage/wiring faults.
Important Notes
Pricing listed on the website is for reference only and is subject to change over time.
Unsure about the exact model? Share a photo or full catalog code. Flexa Systems will confirm compatibility fast.
We service and stock Allen-Bradley PowerFlex 700 VFDs—component-level repairs or ready-to-ship replacements.
- Load testing is performed on all units prior to shipment.
- Lead times and pricing depend on condition and options.
- Expedited exchange programs available.
- 12–24 month coverage on repairs and remans (where applicable).
Same-Day Quote • Repair or Exchange
We repair, test, and ship quickly — or provide a ready-to-ship replacement when available.
Request Service/Quote
Serving all 50 states from Texas. Rush options available.
