Parker 690+0050/460/1BS | Repair & Stock
Parker 690+0050/460/1BS | Repair & Stock
Parker 690+0050/460/1BS | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0050/460/1BS | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0050/460/1BS | 50 HP 460V AC690+ VFD

The Parker 690+0050/460/1BS is a 50 HP variable frequency drive engineered for 460V power systems. Built in a NEMA 1 enclosure, it includes an integrated braking switch and system board for full onboard control and rapid deceleration capability. A great fit for automated environments where dynamic response and system logic are essential.

  • Drive Series: AC690+
  • Rated Power: 50 HP
  • Input Voltage: 460V (±10%), 50/60Hz
  • Frame Size: E
  • Enclosure: NEMA 1 (UL Type 1)
  • Brake Switch: Installed
  • System Board: Installed

Common Drive Issues Flexa Systems Can Resolve:

  • ⚠️ Brake switch failure or overload during decel
  • ⚠️ Communication loss between system board and control circuit
  • ⚠️ Encoder feedback dropouts causing overspeed
  • ⚠️ Desaturation faults tied to internal power stage
  • ⚠️ Undervoltage triggered by weak or unstable power feed
  • ⚠️ Phase loss or imbalance on 3-phase input lines
  • ⚠️ Current limit faults caused by mechanical over-torque
  • ⚠️ Stall trips from improperly tuned acceleration settings
  • ⚠️ 24V output dropout or overload at I/O terminals
  • ⚠️ Internal temperature shutdown due to poor airflow
  • ⚠️ Speed feedback error due to wiring faults
  • ⚠️ Analog input trip from signal noise or short circuit
  • ⚠️ Drive boot loop after configuration error
  • ⚠️ Ripple voltage error in DC link circuit
  • ⚠️ EEPROM corruption or watchdog timeout
  • ⚠️ Brake resistor not properly engaging or overheating
  • ⚠️ VFD not restarting after fault reset
  • ⚠️ Fault Code N indicating board sync failure
  • ⚠️ Motor overtemperature despite proper cooling
  • ⚠️ Startup failure due to software or parameter corruption
  • ⚠️ Low-speed overcurrent caused by improper torque boost

Why Choose Flexa Systems?

Flexa Systems handles every aspect of Parker 690+ series repair, including complex faults like system board replacement and brake circuit diagnostics. We also stock this model — ready to ship. Fast turnarounds, tested repairs, and nationwide service from our Texas base.

📌 Important Notes
Make sure to confirm enclosure and board setup before ordering or sending for service.
Flexa Systems both repairs and stocks the 690+0050/460/1BS.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32074 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping