Parker 690+0050/230/CNS | Repair & Stock
Parker 690+0050/230/CNS | Repair & Stock
Parker 690+0050/230/CNS | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0050/230/CNS | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0050/230/CNS | 50 HP 230V AC690+ VFD

The Parker 690+0050/230/CNS is a 50 HP variable frequency drive designed for 230V systems requiring a chassis build with integrated system control. This model includes a system board for advanced logic capabilities and leaves out the brake switch, offering clean integration into external braking setups or applications without braking.

  • Drive Series: AC690+
  • Output Power: 50 HP
  • Input Voltage: 230V (±10%), 50/60Hz
  • Frame Size: E
  • Enclosure: Chassis (IP20)
  • Brake Switch: Not installed
  • System Board: Installed

Frequent Faults Flexa Systems Can Solve:

  • ⚠️ Internal communication failure (code N) between boards
  • ⚠️ Overcurrent during ramp-up or heavy loads
  • ⚠️ Speed feedback errors from encoder signal drop
  • ⚠️ Phase imbalance or missing input line
  • ⚠️ Desaturation (DESAT) faults in the power circuit
  • ⚠️ Analog input range errors or wiring faults
  • ⚠️ Undervoltage trip caused by unstable input
  • ⚠️ Motor overtemperature due to prolonged low-speed use
  • ⚠️ Faulty system board causing delayed start or reset loops
  • ⚠️ Ripple voltage instability from capacitor aging
  • ⚠️ 24V power supply dropout to external devices
  • ⚠️ Internal EEPROM config issues or boot loop
  • ⚠️ Stall or current limit fault during operation
  • ⚠️ Feedback loop timing error from encoder misalignment
  • ⚠️ Low-speed overcurrent due to aggressive torque boost
  • ⚠️ Shorted output to ground or inter-phase short
  • ⚠️ Faults after power cycle or configuration reset
  • ⚠️ STO or logic watchdog timeout events (if fitted externally)
  • ⚠️ Cooling fault or airflow obstruction on heatsink
  • ⚠️ Overload trip from mismatched load or high inertia
  • ⚠️ Faults caused by external control logic interference

Trust Flexa Systems to Get It Right

Flexa Systems repairs and supplies Parker 690+ VFDs like the 690+0050/230/CNS. Our technicians diagnose down to the component level and fully bench-test repaired drives before shipping. Fast turnaround, nationwide coverage — all from our Texas-based shop.

📌 Important Notes
Confirm whether your system uses braking hardware or only logic control.
Flexa Systems provides both repair and supply solutions for this AC690+ model.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32072 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping