Parker 690+0030/460/CBN | Repair & Stock
Parker 690+0030/460/CBN | Repair & Stock
Parker 690+0030/460/CBN | Repair & Stock
Parker 690+0030/460/CBN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0030/460/CBN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0030/460/CBN | 30 HP 460V AC690+ VFD

The Parker 690+0030/460/CBN is a 30 HP industrial-grade variable frequency drive engineered for a 460V supply. With a compact chassis enclosure, built-in braking switch, and no system board, it’s ideal for integrators and OEMs who need raw power with customizable logic built externally.

  • Drive Series: AC690+
  • Horsepower: 30 HP
  • Input Voltage: 460V (±10%) at 50/60Hz
  • Frame Size: D
  • Enclosure Type: Chassis (IP20)
  • Brake Switch: Included (resistor not included)
  • System Board: Not present

Repairs We Frequently Handle:

  • ⚠️ Brake overloads and resistor burnouts
  • ⚠️ STO (Safe Torque Off) failure – board replacement available
  • ⚠️ Overspeed trips due to encoder signal loss
  • ⚠️ Ripple voltage or phase imbalance errors
  • ⚠️ Analog input issues from incorrect sensor wiring
  • ⚠️ Heatsink and motor temperature shutdowns
  • ⚠️ Stall detection and low-speed overcurrent trips
  • ⚠️ Fault code N (internal comm failure)
  • ⚠️ VDC ripple voltage instability from rectifier problems
  • ⚠️ Overcurrent and shock load faulting during operation
  • ⚠️ Desaturation events (DESAT) due to power section issues
  • ⚠️ Phase failure from supply issues or internal fuse loss
  • ⚠️ Brake short circuits during intense stopping cycles
  • ⚠️ Low voltage detection from unstable line conditions
  • ⚠️ Speed feedback issues during high acceleration loads
  • ⚠️ Shorted or overdriven motor wiring
  • ⚠️ 24V output overloads in customer circuits
  • ⚠️ Communication timeouts from controller config mismatch
  • ⚠️ Boost setting overdrive faults
  • ⚠️ Motor thermal sensor misreadings
  • ⚠️ Current limit triggered under load shifts

We Repair and Supply — Flexa Systems

Need a replacement drive or a fast repair? Flexa Systems handles both. We diagnose and restore 690+ units like the 690+0030/460/CBN, ensuring they’re back to spec with full-load bench testing. Located in Texas, we serve clients across the U.S. with speed and quality service.

📌 Important Notes
Confirm your voltage, enclosure, and braking setup before requesting service.
Flexa Systems provides both repair and sales of these Parker AC690+ drives.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32054 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping