Parker 690+0030/460/1BN | Repair & Stock
Parker 690+0030/460/1BN | Repair & Stock
Parker 690+0030/460/1BN | Repair & Stock
Parker 690+0030/460/1BN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0030/460/1BN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0030/460/1BN | 30 HP 460V AC690+ VFD

This Parker 690+0030/460/1BN drive delivers powerful and reliable speed control for 3-phase motors up to 30 HP. With a 460V input rating and a NEMA 1 enclosed frame, it’s a smart fit for a wide range of industrial automation setups.

  • Series: AC690+
  • Power Output: 30 HP
  • Voltage: 460V (±10%), 50/60Hz
  • Frame: D
  • Enclosure: NEMA 1 (UL Type 1)
  • Braking Option: Brake switch installed (resistor not included)
  • System Board: Not present

Most Frequent Drive Issues We Service:

  • ⚠️ Overvoltage errors from deceleration or high supply voltage
  • ⚠️ Overcurrent during acceleration or motor shock load
  • ⚠️ Brake switch faults on high-inertia stops
  • ⚠️ STO board failure – often repairable quickly
  • ⚠️ Lost communication with control board
  • ⚠️ Analog input range or wiring problems
  • ⚠️ Desaturation (DESAT) trips – linked to power section issues
  • ⚠️ Phase failure or missing input line
  • ⚠️ VDC ripple warnings – typically from bad rectifiers
  • ⚠️ Overspeed shutdowns – encoder feedback signal loss
  • ⚠️ Motor overheating and thermistor misreadings
  • ⚠️ Brake resistor overloads during repeated stops
  • ⚠️ Current limit faults under mechanical overload
  • ⚠️ Speed feedback mismatch causing instability
  • ⚠️ Undervoltage during power dips
  • ⚠️ Heatsink temperature alarms – airflow or ambient heat
  • ⚠️ Short circuit in analog or digital I/O lines
  • ⚠️ Internal communication error code N
  • ⚠️ Stall detection from improper tuning or load
  • ⚠️ Brake short circuit during deceleration
  • ⚠️ Low-speed overcurrent from fixed boost settings

Why Flexa Systems?

Flexa Systems proudly repairs and supplies Parker 690+ series VFDs. Our team provides rapid diagnostics, expert repairs, and complete testing. We serve clients across the U.S. from our Texas-based shop, offering quick turnarounds and reliable solutions for any drive fault.

📌 Important Notes
Reach out for application verification or availability.
Flexa Systems both repairs and sells these AC690+ drives.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32050 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping