Parker 690+0010/460/CBS | Repair & Stock

Parker 690+0010/460/CBS | 10 HP (7.5 kW) 460V VFD

• Series: 690+ AC Variable Frequency Drive
• Power Output: 10 HP (7.5 kW)
• Input Voltage: 460V (Rated 380–460V ±10%)
• Enclosure: Chassis (IP20) — optimized for panel mounting and cabinet installations
• Braking Setup: Equipped with brake switch, external resistor not included
• System Board: Included

Repairs for Faults We Commonly Handle 🛠️

• 🔋 DC overvoltage — often tied to braking misconfigurations or excessive regenerative energy
• ⚡ Undervoltage events from unstable input power, phase drops, or internal PSU damage
• 🚨 Motor overcurrent from improper boost levels, miswired outputs, or shorted windings
• 🌡️ Thermal issues on heatsink from clogged airflow, tight enclosures, or faulty fan modules
• ⛔ Stall trips due to low torque limit, mechanical overload, or misaligned config
• 🔥 Brake resistor overload during rapid stops, especially without delay tuning
• 💥 Brake switch tripping from constant heavy deceleration cycles
• 📡 Communication faults triggered by cable faults, improper setup, or damaged ports
• 🛑 STO safety issues tied to failed Safe Torque Off circuitry
• 🔁 Power/control board communication breakdown, often firmware or bus-related
• 🎯 Speed feedback issues — feedback loop instability or encoder malfunctions
• ⚠️ Current limit exceeded during acceleration or sudden torque surges
• 🔌 24V control output loss — likely from overcurrent or shorted terminal loads
• ⚠️ Input phase detection faults, may stem from fuse failure or bad terminal connections
• 💣 DESAT trip conditions caused by IGBT faults or power board issues
• 🔄 High ripple voltage across DC bus — indicates capacitor or input phase irregularities
• 🧨 Brake circuit shorted or overcurrent detected — typically resistor or wiring related
• 🚀 Overspeed detection linked to encoder errors or mechanical instability
• 📏 Analog input configuration errors — signal overrange or sensor wiring fault
• 🐌 Low-speed overcurrent, often from incorrect boost settings or motor tuning
• 🌡️ Motor thermal trip from poor ventilation, continuous low-speed use, or thermistor failure

Why Partner with Flexa Systems?

Flexa Systems offers expert-level repair and supply solutions for Parker drives like the 690+0010/460/CBS. Whether you’re battling feedback failures, drive trips, or startup issues — we’ve seen it, solved it, and shipped it. Based in Texas, serving all 50 states with reliable, fast turnaround.

📌 Important Notes

Please contact us to confirm your exact requirements or verify application compatibility.

Note: Pricing and availability vary depending on unit condition, configuration, and current stock levels.