Rush Service Available
Same-day evaluation
Allen-Bradley PowerFlex 700 20BD022A2AYNANC1NNAD | 15 kW / 22 A VFD
Repair Estimate or Ship Confirmed
If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BD022A2AYNANC1NNAD in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.
Key Specifications
- Input Voltage: 480V AC
- Current (Amps): 22
- Power Rating: 15 kW / 20 HP
- Frame: 1
- Enclosure: IP20, NEMA/UL Type 1
- HMI Presence: Blank Cover
- Documentation: Manual
- Brake: Yes
- Internal Braking Resistor: No
- Emission: CE Filter: Yes, CM Choke: Yes
- Comm Slot: None
- Control & I/O: Vector | 24V DC
- Feedback: Encoder, 12V/5V
Most Common Faults We Can Solve
These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.
- Encoder Loss: One encoder channel missing (requires differential).
Fix: Verify wiring, rotation, pulse rate; we replace encoder/cable and re-align.
- HW OverCurrent: Output current exceeded hardware limit.
Fix: Check programming & load; we review boost/DC brake settings and load profile.
- Ground Fault: >25% rating current to earth ground detected.
Fix: Meg-check motor and cable for ground; we isolate insulation faults and re-terminate.
- Phase U/V/W to Ground: Phase-to-ground fault detected on the output.
Fix: Check motor cable/motor for grounds; replace drive if damage found.
- Encoder Quad Err: Both channels changed in one clock (noise or fault).
Fix: Reduce noise/replace encoder; we tidy shielding/grounds and retest.
- Input Phase Loss: Ripple indicates a missing input phase or blown fuse.
Fix: Inspect fuses and incoming power; we verify phase balance and replace protection if necessary.
- Phase UV/VW/UW Short: Excessive current between output terminals.
Fix: Check for shorted motor/wiring; we repair/replace damaged output stage.
Important Notes
Pricing listed on the website is for reference only and is subject to change over time.
Have a question about fit? Email us a label photo or the full catalog number—Flexa Systems will verify the correct unit.
We support Allen-Bradley PowerFlex 700 drives with both in-house repair and stocked replacements to keep you running.
- All units undergo full functional and load testing.
- Quotes reflect unit condition, configuration, and availability.
- Exchange / rush options available when time is critical.
- 12–24 month warranty on qualifying repairs & remans.
Speak to a Technician
Send a part number or quick video of the fault. We’ll guide next steps immediately.
Talk to a Tech
No-fix, no-fee on repairs. Honest diagnostics, fast turnaround.
