Texas-Based Shop & Warehouse
12–24 month warranty
Allen-Bradley PowerFlex 700 20BD022A0AYNACC0 | 15 kW / 22 A VFD
Bench Repair or Advanced Exchange Program
If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BD022A0AYNACC0 in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.
Key Specifications
- Input Voltage: 480V AC
- Current (Amps): 22
- Power Rating: 15 kW / 20 HP
- Frame: 1
- Enclosure: IP20, NEMA/UL Type 1
- HMI Presence: Blank Cover
- Documentation: Manual
- Brake: Yes
- Internal Braking Resistor: No
- Emission: CE Filter: Yes, CM Choke: Yes
- Comm Slot: ControlNet (Coax)
- Control & I/O: Vector | 24V DC
- Feedback: None
Most Common Faults We Can Solve
These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.
- OverVoltage: DC bus voltage exceeded the maximum value.
Fix: Verify line transients; extend decel time or add a dynamic brake option; we can size/install a DB kit and soak-test the drive.
- Input Phase Loss: Ripple indicates a missing input phase or blown fuse.
Fix: Inspect fuses and incoming power; we verify phase balance and replace protection if necessary.
- Heatsink OverTemp: Heatsink temperature above limit (or very low).
Fix: Verify ambient, fan operation, and load; we replace fans and clean/recertify cooling path.
- OverSpeed Limit: Speed correction exceeded [Overspeed Limit].
Fix: Remove overhauling load or raise limit; we re-tune slip/bus regulation.
- UnderVoltage: DC bus dropped below the minimum threshold.
Fix: Check incoming AC for sags/interruption; we test input and DC bus health and stabilize with line conditioning if needed.
- Ground Fault: >25% rating current to earth ground detected.
Fix: Meg-check motor and cable for ground; we isolate insulation faults and re-terminate.
- Drive OverLoad: 110% for 1 min or 150% for 3 s exceeded.
Fix: Reduce load or increase accel time; we profile current vs. cycle and tune ramps.
Important Notes
Pricing listed on the website is for reference only and is subject to change over time.
Have a question about fit? Email us a label photo or the full catalog number—Flexa Systems will verify the correct unit.
We support Allen-Bradley PowerFlex 700 drives with both in-house repair and stocked replacements to keep you running.
- All units undergo full functional and load testing.
- Quotes reflect unit condition, configuration, and availability.
- Exchange / rush options available when time is critical.
- 12–24 month warranty on qualifying repairs & remans.
0
