Fast Turnaround & Testing
Phone support by engineers
Allen-Bradley PowerFlex 700 20BB9P6A0NYYBCD0 | 3 kW / 9.6 A VFD
Diagnose & Repair or Next-Day Replacement
If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BB9P6A0NYYBCD0 in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.
Key Specifications
- Input Voltage: 240V AC
- Current (Amps): 9.6
- Power Rating: 3 kW / 4 HP
- Frame: 1
- Enclosure: IP20, NEMA/UL Type 1
- HMI Presence: Blank Cover
- Documentation: No Manual
- Brake: Yes
- Internal Braking Resistor: Yes
- Emission: CE Filter: Yes, CM Choke: No
- Comm Slot: ControlNet (Coax)
- Control & I/O: Vector | 115V AC
- Feedback: None
Most Common Faults We Can Solve
These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.
- Power Loss: DC bus <85% of nominal longer than [Power Loss Time].
Fix: Monitor AC for dips; we add ride-through measures as needed.
- Encoder Quad Err: Both channels changed in one clock (noise or fault).
Fix: Reduce noise/replace encoder; we tidy shielding/grounds and retest.
- UnderVoltage: DC bus dropped below the minimum threshold.
Fix: Check incoming AC for sags/interruption; we test input and DC bus health and stabilize with line conditioning if needed.
- Phase U/V/W to Ground: Phase-to-ground fault detected on the output.
Fix: Check motor cable/motor for grounds; replace drive if damage found.
- Ground Fault: >25% rating current to earth ground detected.
Fix: Meg-check motor and cable for ground; we isolate insulation faults and re-terminate.
- Input Phase Loss: Ripple indicates a missing input phase or blown fuse.
Fix: Inspect fuses and incoming power; we verify phase balance and replace protection if necessary.
- OverVoltage: DC bus voltage exceeded the maximum value.
Fix: Verify line transients; extend decel time or add a dynamic brake option; we can size/install a DB kit and soak-test the drive.
Important Notes
Pricing listed on the website is for reference only and is subject to change over time.
Have a question about fit? Email us a label photo or the full catalog number—Flexa Systems will verify the correct unit.
We support Allen-Bradley PowerFlex 700 drives with both in-house repair and stocked replacements to keep you running.
- All units undergo full functional and load testing.
- Quotes reflect unit condition, configuration, and availability.
- Exchange / rush options available when time is critical.
- 12–24 month warranty on qualifying repairs & remans.
Same-Day Quote • Repair or Exchange
We repair, test, and ship quickly — or provide a ready-to-ship replacement when available.
Request Service/Quote
Serving all 50 states from Texas. Rush options available.
