Parker 690+0050/460/CBN/007 | Repair & Stock
Parker 690+0050/460/CBN/007 | Repair & Stock
Parker 690+0050/460/CBN/007 | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0050/460/CBN/007 | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0050/460/CBN/007 | 50 HP 460V AC690+ VFD

The Parker 690+0050/460/CBN/007 is a 50 HP variable frequency drive designed for use with 460V systems. This model features a chassis enclosure, includes a brake switch, and does not include a system board. The “/007” suffix typically refers to a factory-specific variation or application-tailored firmware package, which Flexa Systems can service or match for replacement needs.

  • Drive Series: AC690+
  • Power Rating: 50 HP
  • Voltage Input: 460V (±10%), 50/60Hz
  • Frame Size: E
  • Enclosure Type: Chassis (IP20)
  • Brake Option: Brake switch included
  • System Board: Not installed
  • Suffix Variant: /007 (Custom configuration)

Issues We Frequently Repair:

  • ⚠️ Brake switch failure during heavy stop cycles
  • ⚠️ Desaturation (DESAT) power circuit faults
  • ⚠️ Overcurrent triggered by abrupt load changes
  • ⚠️ Encoder feedback faults causing overspeed shutdown
  • ⚠️ Undervoltage during low incoming supply conditions
  • ⚠️ Short circuits or ground fault in motor leads
  • ⚠️ Fault code N from system board communication error (if retrofitted)
  • ⚠️ Stall detection with improperly tuned ramp settings
  • ⚠️ Heat-related shutdowns in hot environments
  • ⚠️ Ripple voltage instability in the DC link circuit
  • ⚠️ Analog input range or noise issues
  • ⚠️ Current limit triggered by drive misconfiguration
  • ⚠️ EEPROM memory issues following configuration update
  • ⚠️ Brake circuit overload or improper resistor sizing
  • ⚠️ Faulty cooling fans or blocked heatsink airflow
  • ⚠️ Intermittent startup failures tied to suffix configuration
  • ⚠️ Configuration lockout due to OEM password or mismatch
  • ⚠️ Speed loop instability under PID control
  • ⚠️ 24V supply drop affecting external control logic
  • ⚠️ Phase loss under weak 3-phase feeds
  • ⚠️ Watchdog timeout on complex logic routines (if added)

Repair or Replace — Flexa Systems Has You Covered

We understand suffix variants like the 690+0050/460/CBN/007 and offer both matching replacements and full repairs. Our Texas-based facility serves clients across the U.S. with tested parts, field-proven service, and quick turnaround.

📌 Important Notes
Verify suffix `/007` compatibility when ordering or replacing. Flexa Systems repairs and stocks this Parker AC690+ variant.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32078 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping