Parker 690+0040/230/CBN | Repair & Stock
Parker 690+0040/230/CBN | Repair & Stock
Parker 690+0040/230/CBN | Repair & Stock
Parker 690+0040/230/CBN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0040/230/CBN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0040/230/CBN | 40 HP 230V AC690+ VFD

The Parker 690+0040/230/CBN VFD offers robust 40 HP output on a 230V supply, packed into a compact chassis enclosure. It comes with an integrated brake switch and no system board, making it a perfect fit for installations where external logic control is preferred. Trusted by manufacturers for its power and simplicity.

  • Drive Model: AC690+
  • Power Rating: 40 HP
  • Input Voltage: 230V (±10%), 50/60Hz
  • Frame: D
  • Enclosure Type: Chassis (IP20)
  • Braking Setup: Brake switch installed
  • System Board: Not installed

Top Faults We Commonly Repair:

  • ⚠️ Brake switch overloads and resistor failures
  • ⚠️ Desaturation (DESAT) issues affecting the power section
  • ⚠️ Motor overheating and incorrect thermistor readings
  • ⚠️ Encoder signal drop causing overspeed trips
  • ⚠️ STO board faults — very common on legacy builds
  • ⚠️ Ripple voltage and DC link fluctuation
  • ⚠️ Input phase failure (1 or more legs lost)
  • ⚠️ Analog input misconfiguration (4–20mA problems)
  • ⚠️ VFD shutdown during fast acceleration or decel
  • ⚠️ Heatsink temperature errors from airflow restriction
  • ⚠️ Stall detection and current limit trips
  • ⚠️ Fault Code N – communication board sync failure
  • ⚠️ Speed feedback mismatch under load changes
  • ⚠️ Short circuit in motor cable or between phases
  • ⚠️ Undervoltage due to poor power delivery
  • ⚠️ Brake short circuit detection
  • ⚠️ Boost parameter misadjusted, causing low-speed overcurrent
  • ⚠️ 24V output failure from overloaded control circuits
  • ⚠️ Comm timeouts from incorrect timeout configuration
  • ⚠️ Stall trip due to insufficient torque
  • ⚠️ Internal sensor or firmware error on power-up

Flexa Systems — We’re More Than Just Repairs

Flexa Systems doesn’t just fix the 690+0040/230/CBN — we also supply it. Our repair process includes diagnostics, component replacement, and real-world load testing. Whether you’re in need of a tested replacement or a fast repair turnaround, we’re here for industries across the U.S. from our Texas facility.

📌 Important Notes
Double-check your drive’s configuration and braking setup before shipping or ordering.
Flexa Systems repairs and sells Parker AC690+ units like this one.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32058 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping