Parker 690+0040D/460/CBN | Repair & Stock
Parker 690+0040D/460/CBN | Repair & Stock
Parker 690+0040D/460/CBN | Repair & Stock
Parker 690+0040D/460/CBN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0040D/460/CBN | Repair & Stock

Brand new, original packaging:
$ 7900
In stock: 10
Refurbished price:
$ 4950
In stock: 1
Repair Price Standard:
$ 3050
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0040D/460/CBN | 40 HP 460V AC690+ VFD

The Parker 690+0040D/460/CBN is a 40 HP variable frequency drive tailored for 460V input applications. Built in a chassis-style frame with an integrated brake switch and no system board, it offers an optimal solution for heavy-duty automation that needs braking functionality without embedded logic boards.

  • Drive Family: AC690+
  • Rated Output: 40 HP
  • Input Voltage: 460V ±10%, 50/60Hz
  • Frame Size: D
  • Enclosure Type: Chassis (IP20)
  • Braking Configuration: Brake switch fitted (resistor not included)
  • System Board: Not installed

We Repair These Common 690+ Faults:

  • ⚠️ Brake switch faults caused by excessive braking load
  • ⚠️ Desaturation (DESAT) events linked to power module damage
  • ⚠️ Speed feedback loss triggering overspeed shutdowns
  • ⚠️ Undervoltage and phase loss under load changes
  • ⚠️ Analog input wiring errors or 4–20mA misconfiguration
  • ⚠️ VDC ripple voltage instability
  • ⚠️ Internal communication issues (Code N)
  • ⚠️ Shorted output wiring or ground loop interference
  • ⚠️ Heat overloads in the heatsink or ambient space
  • ⚠️ 24V auxiliary power failures
  • ⚠️ Overcurrent spikes from torque demand mismatch
  • ⚠️ Brake short circuit during emergency deceleration
  • ⚠️ STO signal dropout if retrofitted externally
  • ⚠️ Low-speed overcurrent due to improper boost settings
  • ⚠️ Encoder misreads during startup or deceleration
  • ⚠️ Drive won’t start after brownout event
  • ⚠️ Motor overtemperature shutoff due to improper thermistor feedback
  • ⚠️ Stall faults with abrupt or heavily loaded motors
  • ⚠️ Voltage ripple from aging capacitor bank
  • ⚠️ Configuration lockout from invalid trip parameters
  • ⚠️ Excessive trips during high-inertia load reversal

Repair or Replace — Flexa Has You Covered

Flexa Systems offers complete repair and supply for Parker 690+0040D/460/CBN units. Our experienced techs perform thorough diagnostics, repair to the component level, and test under real load. Based in Texas, we serve clients all over the U.S. with precision and speed.

📌 Important Notes
Always confirm drive configuration before sending it in or ordering replacements.
Flexa Systems proudly offers both repairs and sales for the full AC690+ series.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32066 Categories: , Brand: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping