Parker 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0 | Repair & Stock
Parker 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0 | Repair & Stock
Parker 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0 | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider
Parker

Parker 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0 | Repair & Stock

Brand new, original packaging:
$ 8500
In stock: 10
Refurbished price:
$ 7200
In stock: 1
Repair Price Standard:
$ 3050
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Texas-Based Shop & Warehouse
Serving All 50 States with Fast Turnaround 🇺🇸

Parker 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0 | Repair & Stock

Rapid Repair or In-Stock VFD — Choose What Works

The Parker 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0 model is designed for precision industrial control — and our team handles both urgent repairs and ready-to-ship replacements. Whether you’re troubleshooting feedback issues or seeking a clean swap, we’ve got you covered.

Key Specifications

  • Power Rating: 30 kW / 40 HP
  • Voltage: 400V 3-Phase
  • Rated Output Current: 60–65 A (typical for 0300 rating)
  • Model Code: 690PD/0300/400/0010/GR/0/0/0/SHTTL/0/0/0

System Configuration

  • Frame Size: D
  • Country Code: GR (Greece spec unit)
  • Feedback Module: Installed — **SHTTL** (Single-ended TTL Encoder)
  • Brake Control: Not present
  • Filter: Not included
  • Mounting: Chassis-mounted unit
  • Keypad & Interface: Not included
  • Frequency & Language: GR region defaults

Frequent Faults We Resolve

  • Feedback Fault (SHTTL): Encoder signal loss or mismatched resolution config.
  • IGBT Desaturation: Caused by high loads or aged gate drivers.
  • DC Bus Ripple: Indicates capacitor fatigue or transient voltage events.
  • Phase Loss / Undervoltage: Often traced to wiring faults or fuse failures.
  • STO Issues: Safety board misreads or damaged isolation circuits.
  • Motor Stall Fault: Sudden load spikes, feedback misconfig, or low output torque.
  • Overtemp Warnings: Poor airflow, dirty heatsinks, or failing fans.

🛠️ We service all of these failure modes in-house with genuine parts and bench-tested validation. Component-level repair ensures long-term reliability.

Important Notes

If you’re uncertain about this model’s encoder compatibility or installation fitment, reach out and we’ll help you confirm.

Flexa Systems specializes in both **sales and expert-level repair** of Parker 690PD drives. Our techs work down to board level, ensuring full restoration and fast turnaround backed by our Texas facility.

Note: Specs based on available technical data and part number decoding. Always verify parameters with your system before ordering.

Manufacturer

Parker

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32606 Categories: , Brand: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping