Kinetix 300
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider
ALLEN BRADLEY

Allen-Bradley 2097-V31PR0 | Repair & Stock

Brand new, original packaging:
$ 0.99
In stock: 1
Refurbished price:
$ TBD
In stock: 1
Repair Price Standard:
$ 650
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
📦 Texas-Based Shop & Warehouse
Serving All 50 States with Fast Turnaround 🇺🇸

Allen-Bradley – 2097-V31PR0 | 240V 1-Phase / 2.8A Servo Drive

Fast Repair or Stock Replacement – We’ve Got Your Back

If your Kinetix 300 model 2097-V31PR0 is malfunctioning or showing drive faults, Flexa Systems has your solution. We perform in-depth diagnostics and component-level repairs — and when available, can offer a replacement unit to minimize downtime.

Key Specifications

  • Catalog Number: 2097-V31PR0
  • Drive Series: Kinetix 300
  • Input Voltage: 120/240V AC, Single-Phase
  • Continuous Output Current: 2.8 A (Peak)
  • Voltage Doubler Mode: Supported
  • Input Frequency: 50/60 Hz
  • Cooling Method: Natural Convection
  • Protection Rating: IP20 Enclosure

Drive Configuration

This servo drive integrates seamlessly with Rockwell’s motion systems:

  • Designed for CompactLogix™ and ControlLogix® platforms
  • EtherNet/IP-based indexing motion control
  • Onboard Safe Torque Off (STO) protection circuit
  • 24V DC backup input for safe shutdown and diagnostics

Frequent Issues We Repair

  • STO Circuit Faults: Common due to wiring damage or logic misreads
  • Drive Not Starting: Logic board or internal power stage issues
  • Overcurrent Trips: Bad IGBT module or motor side short
  • Feedback Errors: Issues with resolver or encoder input
  • Communication Drops: Ethernet port damage or grounding faults
  • Noise Interference: Improper shielding or feedback line faults

We inspect, test, and fully validate each repaired drive using industrial-grade testing systems under load.

Why These Drives Fail

From our bench experience, these drives are sensitive to:

  • Improper grounding or missing bonding between control panel and frame
  • Power-line noise or surge exposure without adequate filtering
  • Physical connector wear due to repeated plugging/unplugging

Important Notes

Not sure if this is the right model? Snap a photo of your current unit and reach out to us — our techs will help you match it.

At Flexa Systems, we both repair and sell the 2097-V31PR0 servo drive — backed by a full 2-Year Warranty and fast nationwide shipping from our Texas facility.

Note: All specs listed are based on manufacturer data. Always confirm compatibility before installation.

Manufacturer

ALLEN BRADLEY

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 35003 Categories: , Brand: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping