PowerFlex 700 20BD365U0ANNNNC0 | Repair or Stock Options
PowerFlex 700 20BD365U0ANNNNC0 | Repair or Stock Options
PowerFlex 700 20BD365U0ANNNNC0 | Repair or Stock Options
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider
ALLEN BRADLEY

PowerFlex 700 20BD365U0ANNNNC0 | Repair or Stock Options

Brand new, original packaging:
$ 0.99
In stock: 1
Refurbished price:
$ TBD
In stock: 1
Repair Price Standard:
$ TBD
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
Texas-Based Shop & Warehouse
12–24 month warranty

Allen-Bradley PowerFlex 700 20BD365U0ANNNNC0 | 300 kW / 365 A VFD

Repair Now or Swap Units — Your Call

If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BD365U0ANNNNC0 in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.

Key Specifications

  • Input Voltage: 480V AC
  • Current (Amps): 365
  • Power Rating: 300 kW / 402 HP
  • Frame: 8
  • Enclosure: Roll-In – Front: IP00, NEMA/UL Type Open; Back/Heatsink: IP54, NEMA 12 (Frames 8 & 9 only)
  • HMI Presence: Blank Cover
  • Documentation: Manual
  • Brake: No
  • Internal Braking Resistor: No
  • Emission: CE Filter: No, CM Choke: No
  • Comm Slot: None
  • Control & I/O: Vector | 24V DC
  • Feedback: None

Most Common Faults We Can Solve

These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.

  • HW OverCurrent: Output current exceeded hardware limit.
    Fix: Check programming & load; we review boost/DC brake settings and load profile.
  • OverVoltage: DC bus voltage exceeded the maximum value.
    Fix: Verify line transients; extend decel time or add a dynamic brake option; we can size/install a DB kit and soak-test the drive.
  • Decel Inhibit: Bus regulation halts decel to limit DC bus.
    Fix: Verify line & grounding, add DB resistor or lengthen decel; we configure/supply DB.
  • Input Phase Loss: Ripple indicates a missing input phase or blown fuse.
    Fix: Inspect fuses and incoming power; we verify phase balance and replace protection if necessary.
  • Load Loss: Torque current below [Load Loss Level] for set time.
    Fix: Verify mechanical coupling; we check level/time and drive feedback.
  • Heatsink OverTemp: Heatsink temperature above limit (or very low).
    Fix: Verify ambient, fan operation, and load; we replace fans and clean/recertify cooling path.
  • DB Resistance: Internal DB resistor ohms out of range.
    Fix: Replace resistor; we supply/fit correct DB module and test.

Important Notes

Pricing listed on the website is for reference only and is subject to change over time.

Have a question about fit? Email us a label photo or the full catalog number—Flexa Systems will verify the correct unit.

We support Allen-Bradley PowerFlex 700 drives with both in-house repair and stocked replacements to keep you running.

  • All units undergo full functional and load testing.
  • Quotes reflect unit condition, configuration, and availability.
  • Exchange / rush options available when time is critical.
  • 12–24 month warranty on qualifying repairs & remans.

Repair & Sales • PowerFlex Specialists

Component-level repairs, reman units, and ready-to-ship replacements when available.

Check Availability

Send your requirement — we’ll match repair or stock options.
Manufacturer

ALLEN BRADLEY

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
Cart Close
Updating…
  • No products in the cart.

Continue shopping