Parker 690+0030/460/CBS | Repair & Stock
Parker 690+0030/460/CBS | Repair & Stock
Parker 690+0030/460/CBS | Repair & Stock
Parker 690+0030/460/CBS | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0030/460/CBS | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0030/460/CBS | 30 HP 460V AC690+ VFD

The Parker 690+0030/460/CBS is a 30 HP variable frequency drive featuring a chassis-style build with integrated braking and system board functionality. Designed for a 460V input, this unit provides enhanced flexibility for automation environments where advanced control integration and dynamic stopping are essential.

  • Model Series: AC690+
  • Rated Power: 30 HP
  • Input Voltage: 460V (±10%), 50/60Hz
  • Frame Size: D
  • Enclosure: Chassis (IP20)
  • Brake Option: Brake power switch included
  • System Board: Installed

Common Faults We Resolve:

  • ⚠️ STO board failures causing unexpected shutdowns
  • ⚠️ Overspeed detection due to encoder drift
  • ⚠️ Brake overloads and short circuits during rapid stops
  • ⚠️ Overvoltage and undervoltage trips from supply instability
  • ⚠️ Heat buildup triggering thermal faults
  • ⚠️ Current limit shutdowns under load surges
  • ⚠️ Phase loss or input fuse failures
  • ⚠️ Motor stall errors from incorrect tuning or torque loads
  • ⚠️ Internal communication faults (Code N)
  • ⚠️ Analog input errors from sensor misconfig or damage
  • ⚠️ Ripple voltage alerts in the DC link
  • ⚠️ Low-speed overcurrent due to boost missettings
  • ⚠️ Desaturation faults linked to power section integrity
  • ⚠️ Speed feedback trip from signal dropout
  • ⚠️ 24V output shorts in control circuits
  • ⚠️ Shorted or improperly shielded motor cables
  • ⚠️ Stall trips from improperly set trip duration
  • ⚠️ Excessive brake resistor cycling
  • ⚠️ Lost communication timeout
  • ⚠️ Heatsink sensor failure or blocked airflow
  • ⚠️ Motor over-temperature warnings

Flexa Systems — Repair & Supply Experts

We handle both component-level repair and unit replacement for Parker drives like the 690+0030/460/CBS. Every unit is thoroughly tested before shipping. Located in Texas and serving all 50 states, Flexa Systems is your go-to source for dependable AC690+ VFD service.

📌 Important Notes
Confirm your enclosure, braking, and board setup before purchase or sending for repair.
Flexa Systems both repairs and sells these Parker VFDs.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32056 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping