Parker 690+0030/230/CBN | Repair & Stock
Parker 690+0030/230/CBN | Repair & Stock
Parker 690+0030/230/CBN | Repair & Stock
Parker 690+0030/230/CBN | Repair & Stock
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider

Parker 690+0030/230/CBN | Repair & Stock

Brand new, original packaging:
$
In stock: 1
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

Parker 690+0030/230/CBN | 30 HP 230V AC690+ VFD

This Parker 690+0030/230/CBN variable frequency drive offers high-performance motor control with precise speed regulation. Rated for 30 HP and designed for a 230V input, this unit belongs to the AC690+ series — ideal for demanding industrial applications.

  • Series: AC690+
  • Power Rating: 30 HP
  • Input Voltage: 230V ±10%, 50/60Hz
  • Frame Size: D
  • Enclosure: Chassis (IP20)
  • Brake Option: Brake power switch included (resistor not included)
  • System Board: Not installed

Common Issues We Can Repair:

  • ⚠️ DC Link Overvoltage – typically from rapid deceleration or supply spikes
  • ⚠️ Overcurrent Trips – often due to shock load or shorted motor cables
  • ⚠️ Heatsink Overtemperature – poor airflow or excessive ambient temps
  • ⚠️ Brake Switch Fault – frequently triggered by large inertia loads
  • ⚠️ Lost Communication – timeout settings or damaged boards
  • ⚠️ STO (Safe Torque Off) Board Failures – replaceable and common in older units
  • ⚠️ Current Limit Exceeded – often from oversized loads or bad tuning
  • ⚠️ Phase Loss – missing input phase or fuse issues
  • ⚠️ Analog Input Errors – due to misconfigured signal types or shorted wires
  • ⚠️ Overspeed Trips – possibly related to encoder or sensor feedback
  • ⚠️ Desaturation Faults – a clear sign of power section damage
  • ⚠️ VDC Ripple Alarms – missing phase or failed rectifiers
  • ⚠️ Brake Resistor Overload – occurs under frequent braking cycles
  • ⚠️ Stall Detection – low current limits or poor tuning
  • ⚠️ Low Voltage Trips – unstable input or missing phase
  • ⚠️ Motor Overtemp – misconfigured thermistors or long low-speed runs
  • ⚠️ 24V Output Drop – overcurrent or shorted I/O
  • ⚠️ Speed Feedback Loss – signal interruption or encoder faults
  • ⚠️ Brake Short Circuit – failed brake resistor components
  • ⚠️ Comm Errors (Code N) – controller and power section mismatch
  • ⚠️ Low Speed Overcurrent – tuning or mechanical overload issues

Why Choose Flexa Systems?

At Flexa Systems, we specialize in both repairing and supplying Parker 690+ series VFDs. Our technicians provide in-depth testing and fast turnaround, ensuring minimal downtime. Whether you’re dealing with STO issues, phase faults, or brake resistor failures — we’ve got the expertise to get you running again.

📌 Important Notes
Please contact us to confirm compatibility and application requirements.
Flexa Systems both repairs and sells these AC690+ VFDs.

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 32048 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping