PowerFlex 700 20BD3P4A3NYNACN0 | Repair or Stock Options
PowerFlex 700 20BD3P4A3NYNACN0 | Repair or Stock Options
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider
ALLEN BRADLEY

PowerFlex 700 20BD3P4A3NYNACN0 | Repair or Stock Options

Brand new, original packaging:
$ 0.99
In stock: 1
Refurbished price:
$ TBD
In stock: 1
Repair Price Standard:
$ TBD
Make the order
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.
Texas-Based Shop & Warehouse
12–24 month warranty

Allen-Bradley PowerFlex 700 20BD3P4A3NYNACN0 | 2 kW / 3.4 A VFD

Repair Turnaround or Exchange — Your Choice

If your PowerFlex 700 fails or throws random faults, Flexa Systems can repair your 20BD3P4A3NYNACN0 in-house at the component level or ship you a fully tested replacement unit from our stocked inventory.

Key Specifications

  • Input Voltage: 480V AC
  • Current (Amps): 3.4
  • Power Rating: 2 kW / 3 HP
  • Frame: 0
  • Enclosure: IP20, NEMA/UL Type 1
  • HMI Presence: LCD Display, Full Numeric Keypad
  • Documentation: No Manual
  • Brake: Yes
  • Internal Braking Resistor: No
  • Emission: CE Filter: Yes, CM Choke: Yes
  • Comm Slot: ControlNet (Coax)
  • Control & I/O: Standard | None
  • Feedback: None

Most Common Faults We Can Solve

These are frequent PowerFlex 700 issues. We diagnose quickly and repair at the component level.

  • UnderVoltage: DC bus dropped below the minimum threshold.
    Fix: Check incoming AC for sags/interruption; we test input and DC bus health and stabilize with line conditioning if needed.
  • OverVoltage: DC bus voltage exceeded the maximum value.
    Fix: Verify line transients; extend decel time or add a dynamic brake option; we can size/install a DB kit and soak-test the drive.
  • Input Phase Loss: Ripple indicates a missing input phase or blown fuse.
    Fix: Inspect fuses and incoming power; we verify phase balance and replace protection if necessary.
  • HW OverCurrent: Output current exceeded hardware limit.
    Fix: Check programming & load; we review boost/DC brake settings and load profile.
  • Transistor OverTemp: Power devices exceeded safe temperature.
    Fix: Same as above—cooling & load audit; we replace failed fans/IGBTs and test.
  • Phase U/V/W to Ground: Phase-to-ground fault detected on the output.
    Fix: Check motor cable/motor for grounds; replace drive if damage found.
  • SW OverCurrent: 1 ms current exceeded its rating (above cont., below HW limit).
    Fix: Reduce load/boost/brake volts; we capture waveforms and reset to safe values.

Important Notes

Pricing listed on the website is for reference only and is subject to change over time.

Send us your full catalog number (or a photo) and Flexa Systems will verify compatibility before you order.

We keep you running with repair or replacement for Allen-Bradley PowerFlex 700 drives—whichever gets you back online faster.

  • Units are inspected, repaired as needed, and load-tested.
  • Lead time and pricing depend on condition and availability.
  • Exchange and hot-rush options offered on request.
  • 12–24 month warranty for repairs/remans where applicable.

Start Your Repair Today

Dallas–Fort Worth shop • Nationwide coverage • Exchange and rush service on request.

Start Repair

We’ll confirm compatibility and lead time the same day.
Manufacturer

ALLEN BRADLEY

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
Cart Close
Updating…
  • No products in the cart.

Continue shopping