PowerFlex 523 25A-D017N104 | Stock & Repair Options
Representative photo only, the picture does not illustrate the actual unit and is provided for reference purposes only
US Seller and services provider
ALLEN BRADLEY

PowerFlex 523 25A-D017N104 | Stock & Repair Options

Check availability
Request repair
Field Service Request
Call +1 (254) 254-0005 for a Quote
Delivery
Estimated delivery time for selling products 3-10 days.
Regular repair estimated turnaround time 5-20 days.
Hot rush repair turn around time 1-5 days.

PowerFlex 523 25A-D017N104 | 17.0A 10HP 480V VFD

Flexa Systems provides field-proven repair and diagnostics for PowerFlex 523 drives including model 25A-D017N104. We serve all of Texas with advanced component-level troubleshooting and rapid turnaround.

Technical Specifications – 25A-D017N104

  • Drive Series: PowerFlex 523
  • Voltage Rating: 3-phase 480V AC
  • Output Current: 17.0 Amps
  • Motor Horsepower: 10 HP (7.5 kW)
  • Frame Size: C
  • Enclosure: IP20 Open Type (NEMA)
  • Braking: Internal Braking Transistor (no resistor)
  • Control Interface: Standard keypad module

Frequent Faults We Fix on 25A-D017N104 Units

  • Fault 3 – Power Loss: Sudden input loss or DC link collapse. We verify fuses, rectifiers, and power boards.
  • Fault 4 – Undervoltage: Typically tied to unstable AC supply. We test line filters and link capacitors.
  • Fault 5 – Overvoltage: Caused by regen peaks. Flexa tests braking chopper circuitry and energy absorption pathways.
  • Fault 7 – Motor Overload: Detected by excessive current draw. We review thermal feedback and torque limits.
  • Fault 12 – HW Overcurrent: Output short or failed IGBT bridge. Repaired through precise gate/driver board matching.
  • Fault 13 – Ground Fault: Line-to-ground leakage. We isolate damaged cables or drive stages.
  • Fault 21 – Output Phase Loss: Usually a blown output channel. We run dynamic motor/load testing to confirm.
  • Fault 64 – Drive Overload: Excess duty or poor ventilation. We clean, calibrate, and test thermally.
  • Fault 122 – I/O Board Fail: Control logic error. Often resolved by chip-level repair or board swap.

We fully test repaired units under dynamic load and provide a 2-year functional warranty.

Why Trust Flexa Systems with Your 25A-D017N104?

  • Texas Coverage: Serving DFW, Houston, Austin, and beyond.
  • Stock Availability: Ready-to-ship units in inventory for urgent replacements.
  • Chip-Level Repairs: From IGBTs to microcontrollers, we fix it all in-house.
  • Certified Technicians: Experts in PowerFlex 520-series design and failure patterns.
  • Quick Turnaround: 2–4 day repair cycles. Rush service available.

Request 25A-D017N104 Repair or Field Service

Whether your drive needs diagnostics, repair, or swap — Flexa Systems is here to help.

📞 Call Us: (254) 254-0005

📧 Email: office@flexa-systems.com

📍 Location: Dallas–Fort Worth, Texas

Manufacturer

ALLEN BRADLEY

Flexa-Systems LLC is not officially linked as a dealer, agent, or affiliate of any designers, brands, or manufacturers whose products are showcased on www.flexa-systems.com. Any mentioned trademarks, brand names, or logos serve solely for identification purposes and remain the registered trademarks of their respective owners, who maintain their rights. The inclusion of these trademarks, brand names, or products on our website does not imply any affiliation or endorsement by the company, trademark, or brand."

Flexa Systems' (2) Year Limited Warranty

Our Warranty
Flexa Systems LLC offers a comprehensive warranty program to ensure peace of mind for your industrial equipment investments. Limited Warranty Coverage
  • Equipment Repairs:
    We provide a 2-year limited warranty on all industrial equipment repairs performed by our technicians. This warranty demonstrates our commitment to the quality of our workmanship. If a repaired item fails due to a covered defect, we will re-repair it free of charge.
  • New Equipment Sales:
    New equipment carries the original manufacturer's warranty. We will gladly facilitate warranty processes with the manufacturer on your behalf.
  • Refurbished Equipment Sales:
    Refurbished equipment comes with a 2-year limited warranty from Flexa Systems LLC, covering defects in materials and workmanship related to our refurbishment process.
Warranty Exclusions (Applies to both repair and refurbished equipment warranties)
This warranty does not cover:
  • New damage caused by liquid, dust, or object contamination
  • New damage caused by mechanical impact, improper installation, incorrect accessories, voltage or current issues, overloading, or overheating.
  • Severe scratches on the unit
  • Broken display (if applicable)
  • Impact or dropping of the unit
  • Removal or deterioration of the warranty sticker
  • Opening the product's cover (if applicable)
Warranty Claim Process
To initiate a warranty claim, please contact our customer support team. Repair or replacement under warranty can take up to 31 calendar days.
Important Note: We repair industrial equipment from various brands; however, we are not a dealer, agent, or affiliate of any specific designers, brands, or manufacturers.
SKU: 000021013 Categories: ,
Cart Close
Updating…
  • No products in the cart.

Continue shopping